Boomba Racing License Plate Washers

[Boomba Racing]

Quite a few have asked for something like this, so here they are!

These precision-machined pieces of aluminum add the finishing touch of refinement on your car. The Boomba Racing License Plate Washers are meant to sit underneath your OEM license place bolts between the bolt head and the license plate. Doing so adds a very clean look to your vehicle and helps to eliminate any excessive play or shake by the plate itself. You can also add your own bolts if you are looking to have something with the head sitting completely flush.

As always these pieces are available in your choice of natural aluminum, red, black, or blue anodizing.

Purchase link: Ford License Plate Washers - Boomba Racing, Inc.

MSRP: $22.00 FREE SHIPPING

 

[J2FoRS]

Kinda neat idea! I've never really thought about something like this. I have tinted plate covers on mine I'll have to go look at them to see if these clear the raised edge on them, I can't picture it in my head atm. For 20 bucks only maybe I'll tack on a black set of these to my Thanksgiving order this weekend!
Cool thinking, the little things sometimes make a big difference! Cleans up the holes nicely.

 

[frankiefiesta]

Just ordered these along with battery tie down and oil cap

 

[Kip2MyLou]

Just ordered these along with battery tie down and oil cap

Did you order a red one? Because they've been out forever and I want one. Any idea of when they're coming in boomba??

 

[frankiefiesta]

Did you order a red one? Because they've been out forever and I want one. Any idea of when they're coming in boomba??

No I got everything black.. I know boring lol

 

[CanadianGuy]

[MENTION=1045]Boomba Racing[/MENTION]

You know I beleive [MENTION=3329]j2FiST[/MENTION] would buy this with a wingriser for a nice Canadian Thanksgiving.

*coughheneedswingriserscoughIwantoilcapcoughyouloveusupnorthcoughhaveasaleforcanadacough*

 

[kjohn09e]

Quit giving me reasons to buy things boomba. My wallet begs you.

 

[Boomba Racing]

Quit giving me reasons to buy things boomba. My wallet begs you.

Sorry

 

[gizyuluu]

Just bought these in anodized red. I intend to post pics once I find a bolt solution as this item is only the washers. The OEM license plate bolts are extremely ugly with a matte silver finish that wont gel with this at all.

 

[Boomba Racing]

Just bought these in anodized red. I intend to post pics once I find a bolt solution as this item is only the washers. The OEM license plate bolts are extremely ugly with a matte silver finish that wont gel with this at all.

We're in for results!

 

[gizyuluu]

Ordered these as my bolt solution:

https://www.probolt-usa.com/aluminium-bodywork-bolt-race-spec-m6-x-1-0mm-x-12mm-pack-x-5.html

Not sure if they will fit (the world of bolt dimmensions and metric to standard conversions is a confusing one). I also couldnt find a reference that indicated what size the OEM bolts were, but I do have a backup solution and either way, will post pics

 

[gizyuluu]

OK Boomba, here are your pics. I went with some anodized aluminum bolts in black I found from a company called pro-bolt. I am not sure if they are an exact size match to factory, as I never could fine the OEM spec. However, I did some measuring and a lot of research and these seemed to be a close match, plus they screwed in just fine and are snug. I was also very happy with how close the bolt flange fit inside the Boomba license plate washer. Huge improvement over stock IMO. Hope you guys approve!

Factory license plate bolt


Pro-Bolt


Comparison of factory bolt with Pro-Bolt next to Boomba washer


Finish

 

[Boomba Racing]

OK Boomba, here are your pics. I went with some anodized aluminum bolts in black I found from a company called pro-bolt. I am not sure if they are an exact size match to factory, as I never could fine the OEM spec. However, I did some measuring and a lot of research and these seemed to be a close match, plus they screwed in just fine and are snug. I was also very happy with how close the bolt flange fit inside the Boomba license plate washer. Huge improvement over stock IMO. Hope you guys approve!

Factory license plate bolt
View attachment 9374

Pro-Bolt
View attachment 9372

Comparison of factory bolt with Pro-Bolt next to Boomba washer
View attachment 9371

Finish
View attachment 9373

That bolt looks like it means business! Looks great!

 

[F1Fletch]

Very nice!

 

[Izzy]

Why Boomba? Are you consciously trying to fiscally ruin me? lol
Back in the day I had every visible 10mm bolt in my EG6 with these...that's close to 100!! Anyone that knows Honda's can attest you can tear one down with a single 10mm wrench.

 

[Izzy]

Can you include some nice bolts with your kit as well?

 

[GreenFiST]

I would be interested in buying some Red ones

 

[Boomba Racing]

I would be interested in buying some Red ones

We're making more and they should be back in stock soon!

 

[Boomba Racing]

All colors back in stock!

 

[GreenFiST]

Id like to order but web site says "The selected product combination is currently unavailable."