Can I still install mud flaps? (Broke rear tabs *pic*)

[Striker]

I pulled too hard trying to remove one of the push pins holding the rear felt fender liners in place and in the process I pulled apart the piece pictures and circled below off the inner bumper skin.

Can I still run the mud flaps? Rok Blocks read my fb message asking the same thing (twice) and never got back to me.

Sent from my iPhone using Tapatalk

 

[OCS12]

As long as the metal tab is still there, you could just go to the hardware store and pick up a threaded sheet metal clamp and a bolt of the right size for about a dollar. It'd give you a nice metal replacement for the broken plastic bits, and you're back in business.

 

[Striker]

Everything is still there- just at the base right where it joins the bumper sides it's been ripped off a couple inches.


Sent from my iPhone using Tapatalk

 

[thePete]

Fiberglass it back on. Or some type of 2-part plastic bonding stuff. Q-bond works awesome but it's awkward to work with if it's not laying flat.

 

[CanadianGuy]

Jbweld plastic will work very well.