CHANGE THE CONNECTING ROD

[XMENLULU93]

BONJOUR QUELQU'UN CONNAÎT LE COUPLE DE SERRAGE DU ROULEMENT DE VILEBREQUIN.

ET LE jeu axial des vilebrequins ...

 

[Fiestig]

Quelqu'un sur le forum peut avoir un manuel d'entretien sous la main. Vous pouvez également contacter directement le service Ford pour obtenir la réponse.

English: Someone on the forum might have a service manual on hand. Alternatively you may be able to contact ford service directly for the answer.

 

[MagnetiseST]

Quelqu'un sur le forum peut avoir un manuel d'entretien sous la main. Vous pouvez également contacter directement le service Ford pour obtenir la réponse.

English: Someone on the forum might have a service manual on hand. Alternatively you may be able to contact ford service directly for the answer.

Are they asking the procedure to remove the connecting rods and replace it?

 

[Fiestig]

Torque specs for crank bearing


Translated...I think: HELLO SOMEBODY KNOWS THE TIGHTENING TORQUE OF THE CRANKSHAFT BEARING.

AND THE axial play of the crankshafts ...

 

[Capri to ST]

BONJOUR QUELQU'UN CONNAÎT LE COUPLE DE SERRAGE DU ROULEMENT DE VILEBREQUIN.

ET LE jeu axial des vilebrequins ...

I'm not sure if this has the information you are looking for, but here is a link to an online service manual. -
http://www.nicksmustangranch.com/Service_Manuals/2014/2014_Fiesta/Service Manual.htm

 

[XMENLULU93]

BONJOUR QUELQU'UN CONNAÎT LE COUPLE DE SERRAGE DU ROULEMENT DE VILEBREQUIN.

ET LE jeu axial des vilebrequins ...
JE N'AI PAS DE RÉPONSE DE FORD

 

[XMENLULU93]

J'AI BESOIN DU COUPLE DE SERRAGE DU ROULEMENT DE VILEBREQUIN.

ET LE jeu axial des vilebrequins ...

 

[XMENLULU93]

I NEED THE TIGHTENING TORQUE OF THE CRANKSHAFT BEARING.

AND THE axial clearance OF the crankshafts ...

 

[XMENLULU93]

HELLO
THANK YOU
FOR INFORMATION

 

[XMENLULU93]

I'm not sure if this has the information you are looking for, but here is a link to an online service manual. -
http://www.nicksmustangranch.com/Service_Manuals/2014/2014_Fiesta/Service Manual.htm

HELLO
THANK YOU
FOR INFORMATION

 

[doctor]

Since the link above is not working anymore, can aybody post the torque specs for crankshaft and connecting rods for the 1.6 ecoboost engine? Link to the manual would be much appreciated!

 

[MagnetiseST]

Wish I'd have saved a copy when I could have. Hes taken his workshop manuals down for now it seems.

 

[doctor]

Maybe someone here has got one! Workshop told me 60Nm and 40nm, crank and rods. It is obvious that they have no idea and they talked in general.

 

[D1JL]

I would think that before anyone would attempt to rebuild an engine, the FIRST tool they would buy would be a service manual.

Attached is what you need.

 

[doctor]

Sure! Thank you so much


Sent from my iPhone using Tapatalk