Cobb AP map switching setup

Member ID
#1257
Messages
180
Likes
13
#1
Hey guys I just picked up my Cobb yesterday and im very excited to play with it, but one thing iI couldn't figure out is, how do you set up the map slots for the map switching on the fly?

Thanks!
 


TheStig

Senior Member
Member ID
#540
Messages
860
Likes
118
#2
From the factory it only comes with two maps to switch to, a pseudo fuel econ map and your highest performance map (usually Stage 1 91 or 93 octane). Otherwise you will need access tuner software from COBB that lets you change settings and set up your additional map slots.

Thats as i understand it at least, im sure others will chime in with additional info.
 


BoostBumps

4000 Post Club
Staff Member
Member ID
#13
Messages
4,277
Likes
1,033
#3
All Cobb OTS maps only come with Slot #1 (Performance Mode) and Slot#2 (Economy Mode) populated...

Here is a video from Cobb (below) where Braden demonstrates how to select slots..

[video=youtube;vmvqXnQ48pg]https://www.youtube.com/watch?v=vmvqXnQ48pg[/video]

To populate the rest of the slots you would need to have either Cobb's Accesstuner Race program or have a Protuner generate a custom map with all slots populated with various OTS maps such as (Stg1, 2, or 3) / Valet / Eco / along with perhaps some custom tunes...

For example:

I currently have 4-way map switching slots setup as follows: Slot #1-(e10) / #2-(e20) / #3-(e30) / #4-Valet
 


OP
L
Member ID
#1257
Messages
180
Likes
13
Thread Starter #4
All Cobb OTS maps only come with Slot #1 (Performance Mode) and Slot#2 (Economy Mode) populated...

Here is a video from Cobb (below) where Braden demonstrates how to select slots..

[video=youtube;vmvqXnQ48pg]https://www.youtube.com/watch?v=vmvqXnQ48pg[/video]

To populate the rest of the slots you would need to have either Cobb's Accesstuner Race program or have a Protuner generate a custom map with all slots populated with various OTS maps such as (Stg1, 2, or 3) / Valet / Eco / along with perhaps some custom tunes...

For example:

I currently have 4-way map switching slots setup as follows: Slot #1-(e10) / #2-(e20) / #3-(e30) / #4-Valet
Ahh I see, so can regular folks like me get their hands on to the accessories pro software?
 




Top