Cylinder misfire after coilpack/ bov adapter mod

[Volker45]

Hello fellow egg car bros!

Did a few mods on my Fiesta today. Changed the coilpacks (whoosh) bov adapter (whoosh) and intake. however upon startup I am received a few misfire codes (2 cylinders) . Put the stock coils back on and now its just 1 cylinder misfiring. Could this be the bov adapter causing this? or bc I need brand new spark plugs alongside the coils?

 

[Snrub]

Is it possible the plug wires aren't on tight?

 

[TyphoonFiST]

It is possible the Coil boots are not seated correctly* or dielectric grease was used and is now stopping flow of electricity to the plug.

 

[Volker45]

It is possible the Coil boots are not seated correctly* or dielectric grease was used and is now stopping flow of electricity to the plug.

Looks like one of the plugs were faulty! returned the set and got a new full set, slapped em on and car works!

 

[HAHAFiST]

It is possible the Coil boots are not seated correctly* or dielectric grease was used and is now stopping flow of electricity to the plug.

I would think some dialectric grease would help but were you implying too much oculd've been used?