Fiesta ST Front Lip / Splitter

[BoostBumps]

All of the ramps are too steep.
The splitter hits the ramp before the car can go up.
It is best to use a 2x4 in front of all the ramps I have tried.



Dave

thanks!

 

[rodmoe]

All of the ramps are too steep.
The splitter hits the ramp before the car can go up.
It is best to use a 2x4 in front of all the ramps I have tried.



Dave

Sometimes WOOD is a race cars best friend .. either to get a low car high enough to access the jack point or to help a race car in the race trailer .. Can't have too much wood ..

 

[D1JL]

Can't have too much wood ..

Even my doctor helps me get wood.


Dave

 

[RAAMaudio]

Mine too!

I always carry a variety of wood blocks, plywood sheets, etc in my race trailer, tool box, back of car if not taking the trailer and I have a whole bunch of different ones in my shop I use constantly, maybe the most used tools I have.

 

[Original J-Pat]

So...karztec lip is $62...?

LOL right? i was just looking at that today I would order it but seems impossible and I don't want a triple R splitter everyone has one

 

[SirSlaughter]

Someone less awkward and shy than me get in contact with them. I want that rear bumper piece! It must be made mine! And that Splitter looks unbelievable.

 

[D1JL]

I would buy that Karztec rear defuser if I could contact tr.


Dave

 

[OWfisting]

Someone less awkward and shy than me get in contact with them. I want that rear bumper piece! It must be made mine! And that Splitter looks unbelievable.

After zooming in on the splitter, it looks like it's taped to the fender on the driver's side

 

[Original J-Pat]

I'll tape it lol $62 bucks ill tape it

 

[Original J-Pat]

Anyone had an aeroflowdynamics splitter I know they"re based out of Cali

 

[BlueBomber]

I'll tape it lol $62 bucks ill tape it

how is it $62 USD, someone did their math way wrong Y7600 is closer to $760

 

[SirSlaughter]

how is it $62 USD, someone did their math way wrong Y7600 is closer to $760

umm....I think you added a zero where it shouldn't be. Y7600=$62.99

Every "Y" is equal to $0.0083.

I've ordered a few anime figures from Japan and I I've ordered figures for Y8000 with another Y2000 of shipping. Making it out to about roughly $100.
http://gsr-global.ecq.sc/

I do the GSR sponsorship every year.

 

[Perfblue15]

Damn at that cheap I would try one I don't car how I have to mount it

 

[D1JL]

Is it Japanese Yen or Chinese Yen?




Dave

 

[XuperXero]

It's in Chinese Renminbi. Karztec makes actually very expensive products.

From Google
7600 Chinese Yuan equals
1224.16 US Dollar

 

[Perfblue15]

It's in Chinese Renminbi. Karztec makes actually very expensive products.

From Google
7600 Chinese Yuan equals
1224.16 US Dollar

Yeah to rich for my blood. Where's a $150 splitter when I need it.

 

[SirSlaughter]

It's in Chinese Renminbi. Karztec makes actually very expensive products.

From Google
7600 Chinese Yuan equals
1224.16 US Dollar

Ah, well then. I have been corrected. Please ignore my previous post.

 

[SQFiST]

Any body with the mountune splitter?

 

[DRock]

Any body with the mountune splitter?

Yessir I run one

 

[SQFiST]

how do you like it? good quality?