-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
Location of knock sensor?
- Thread starter crankin
- Start date
303-14B Electronic Engine Controls - 1.6L EcoBoost (132kW/180PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 05/21/2013
--------------------------------------------------------------------------------
Front Knock Sensor (KS)
Removal
NOTE: Removal steps in this procedure may contain installation details.
Refer to: Throttle Body (303-04B Fuel Charging and Controls - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).
NOTE: Note the position of the component before removal. The KS must be installed in the 2 o'clock position.
Torque : 18 Nm
Installation
NOTE: Make sure that the components are installed to the position noted before removal.
To install, reverse the removal procedure.
Copyright ? Ford Motor Company
--------------------------------------------------------------------------------
Removal and Installation Procedure revision date: 05/21/2013
--------------------------------------------------------------------------------
Front Knock Sensor (KS)
Removal
NOTE: Removal steps in this procedure may contain installation details.
Refer to: Throttle Body (303-04B Fuel Charging and Controls - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).
NOTE: Note the position of the component before removal. The KS must be installed in the 2 o'clock position.
Torque : 18 Nm
Installation
NOTE: Make sure that the components are installed to the position noted before removal.
To install, reverse the removal procedure.
Copyright ? Ford Motor Company
--------------------------------------------------------------------------------
Attachments
303-14B Electronic Engine Controls - 1.6L EcoBoost (132kW/180PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 05/21/2013
--------------------------------------------------------------------------------
Rear Knock Sensor (KS)
Removal
NOTE: Removal steps in this procedure may contain installation details.
NOTE: Note the position of the component before removal. The KS must be installed in the 10 o'clock position.
Torque : 18 Nm
Installation
NOTE: Make sure that the components are installed to the position noted before removal.
To install, reverse the removal procedure.
Copyright ? Ford Motor Company
--------------------------------------------------------------------------------
Removal and Installation Procedure revision date: 05/21/2013
--------------------------------------------------------------------------------
Rear Knock Sensor (KS)
Removal
NOTE: Removal steps in this procedure may contain installation details.
NOTE: Note the position of the component before removal. The KS must be installed in the 10 o'clock position.
Torque : 18 Nm
Installation
NOTE: Make sure that the components are installed to the position noted before removal.
To install, reverse the removal procedure.
Copyright ? Ford Motor Company
--------------------------------------------------------------------------------
Attachments
Here is a list of monitors that can be logged associated with all the knock sensors(s) if your looking to isolate and gather more info....
https://cobb.app.box.com/ford-monitor-list
https://cobb.app.box.com/ford-monitor-list
Similar threads
-
-
-
-
-
Turn signal LED resistors (front and back) install locations? Mounting 3m tape vs screws?
- Started by MadMaxFiesta
- Replies: 2
-
-
-
-
FS 2014 Fiesta ST - Molten Orange - 48k - location: WV - Price: $11,700
- Started by GravityKillsYou
- Replies: 10
-
