I assume my evap harness has finally failed given the codes, but it keeps filling my cabin with smoke and fumes under load. Seems to be inconsistent, but if I do 80 it seems to be most likely to happen and tends to stop when I stop or slow down. No obvious sign of leaks or drips anywhere and I'm over an hour away from home so I'm trying to figure out my options. Runs fine, same stumbling at idle like the updated harness is known to give but no loss of power or anything and my AP doesn't seem to show anything obvious in the gauges. The answer I assume is obviously to replace the evap harness (which I should have years ago but... It worked till now).
I couldn't find any reports about smoke or fumes inside from it so I figure I should at least post about it saying this has happened to me too for anyone else unlucky enough to have it happen to them. Been watching it idle for 10 minutes with the hood up and everything looks and sounds as normal.
I couldn't find any reports about smoke or fumes inside from it so I figure I should at least post about it saying this has happened to me too for anyone else unlucky enough to have it happen to them. Been watching it idle for 10 minutes with the hood up and everything looks and sounds as normal.