• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!

GB Retrofit Headlight Service

Trader history for PerfectCreature (2)

Messages
230
Likes
107
Location
Maine
#1
[Not sure if this should be in sale forum or group buy forum?]

After lurking on the forums for the last 2 years and being an active member for almost as long I have noticed that unlike other forums we do not have an active retrofitter in our ranks.
Having done several of them, with great success I would like to offer this service to our community with introductory prices.

I could offer the following options at introductory prices for the first 3 individuals and they would be recognized below and would have their build progress publicly displayed for the rest to drool over and be jealous of. :D
1) Negi
2)
3)

Acme Standard H1 $475:
These would include the relay harness, Acme SuperStart Ballast, Morimoto relay and B stock Bullet shroud (may have factory blemishes) and the acme bulbs from 4300,5k, 6k. These have a 6 month factory warranty on projectors and 1 year on the ballast. These are basic projector and will provide a moderate improvement over stock. These are a budget option that gets the job done.

Acme Super H1 $525:
These would include the Acme SuperStart Ballasts, Morimoto relay, and B stock Bullet shroud (may have factory blemishes), and acme bulbs 4300k, 5k,6k. These have a higher quality control than the Acme standard, but are essentially the same as above. These will have slight better output and less chances of factory defects or issues down the road as a result of better quality control. These are best of quality that Acme produces and as such are "super"ior to the Acme standards.

Morimito Mini H1 8.0. $600. These would come with Hylux 2A88 ballasts, Morimoto relay and Bullet shroud and your option of Morimoto XB bulbs in 3800k,4k,5k,6k. These would be the premium option. Personally run by myself and have an outstanding warranty of 3 year on the projector and ballast.


Want something cooler or just want to stand out?

Upgrade Acme Speedy Start to Hylux Ballasts $30
Profile Prism Switchback Halo for $90 (Amber/White)
Profile Prism RGB Halo $200 w/ Bluetooth Controller
Blackout All That Chrome $50
ColorMatch All That Chrome $75 (Will need to provide paint code to have it color matched)
DemonEyes (Morimoto MiniH1 8.0 ONLY) [Amber,Red, Green, White, Purple, Blue] $45

Costs include all labor to install and setup and assume the use of OEM headlights.

Aftermarket Replicas that do not use permaseal would have a $75 labor discount applied to purchase upon confirmation of sealant type used.

You would be responsible for shipping your set of headlamps, OEM or Aftermarket Replica to me and I would ship them back to you at no cost for USA only.

These prices are for the first 3 individuals.

Any questions please PM me.

See photos below for examples of my work.

D72FF8F6-E50E-4700-8B97-7008D01598E8_1_201_a.jpeg 917661B8-20C2-4B2D-BB90-AB8470CC273F_1_201_a.jpeg A401E879-D762-4E50-BA93-14255AFF0995_1_201_a.jpeg E881ABD8-8629-4446-B466-1829F84EBEA5_1_201_a.jpeg
55482B37-CC5A-4DEA-86D1-B56F51270FF6_1_201_a.jpeg 327E95F8-9713-4867-B4B5-B0F2B897E94B_1_201_a.jpeg


See below other models I have done in the past. Currently however, I will be doing only Fiesta ST models at this time.

69C3433D-3482-4F12-AA69-8278711D493B_1_201_a.jpeg 528BF39E-FCFD-462C-851F-D950CED84D40_1_201_a.jpeg 02C45B82-6BCC-48CE-8E1B-F3366A6D874F_1_201_a.jpeg
 


Last edited:

borborpa

Member
Premium Account
Messages
108
Likes
57
Location
Central PA
#4
Yes. This is at a measured 25ft away.
Nice. That cutoff on the low beam pics is SHARP! Does the retrofit involve pulling my headlights and sending them off for the work? (I assumed this, just wanted to make sure)

[EDIT] Nevermind that last part...I need to learn to finish reading.
 


OP
PerfectCreature
Messages
230
Likes
107
Location
Maine
Thread Starter #5
Nice. That cutoff on the low beam pics is SHARP! Does the retrofit involve pulling my headlights and sending them off for the work? (I assumed this, just wanted to make sure)

[EDIT] Nevermind that last part...I need to learn to finish reading.
You can send in your headlights if you’d like too. I can source an aftermarket for around $170-200 depending on availability.
That cutoff is with the Mini H1s which is the most expensive option but offers the best performance.
 


OP
PerfectCreature
Messages
230
Likes
107
Location
Maine
Thread Starter #6
We have our first member, Negi who has decided he will struggle to see through the darkness no more! He will be the light others follow and a beacon of.....well anyway, let there be light.

Who else wants to get in on this, two spots left until I figure out that I grossly underestimated the cost and will need to charge more. :ROFLMAO::LOL:
 




Top