S280.V.S whoosh hybrid

[hockeyman]

I’m in a predicament of what kind of turbo to go with I’m only looking to stick with stock fueling and stock block and internals but I just want that extra umhp my HP # and tourqe # is roughly like 230-250 hp and subs 300 tourqe I’ve got 72k miles and just want a reliable safe place to have fun I’ve got the intake and inner cooler set up so what would y’all recommend I do like the quick hit of power from the stock turbo but I do really wish I had more of a power band than only having 3 seconds of fun

 

[dhminer]

1. This is extensively discussed, just search n00b.

2. We generally don’t shit on forum noobs here, so disregard #1.

Both are great options and you really can’t go wrong either way. The hybrid is a totally stock housing, so you won’t need to modify anything whatsoever to make it fit. The S280 has a much larger compressor housing which requires breaking out the angle grinder on the back of the block to make space. Reaching it is the hardest part, but once you’ve got yourself laid across the top of your engine with grinder in hand, it takes about 10 minutes to do the grinding including a few test fittings to make sure the clearance is good. Hybrid will have essentially the same powerband as stock turbo, just a lot more of it. S280 shifts the powerband up a bit. It still spools plenty early and pulls until you bounce the rev limiter which is why it’s by far the most popular turbo for our cars. I just removed a turbo kit that cost me over $6k to put an S280 on. lol

 

[hockeyman]

1. This is extensively discussed, just search n00b.

2. We generally don’t shit on forum noobs here, so disregard #1.

Both are great options and you really can’t go wrong either way. The hybrid is a totally stock housing, so you won’t need to modify anything whatsoever to make it fit. The S280 has a much larger compressor housing which requires breaking out the angle grinder on the back of the block to make space. Reaching it is the hardest part, but once you’ve got yourself laid across the top of your engine with grinder in hand, it takes about 10 minutes to do the grinding including a few test fittings to make sure the clearance is good. Hybrid will have essentially the same powerband as stock turbo, just a lot more of it. S280 shifts the powerband up a bit. It still spools plenty early and pulls until you bounce the rev limiter which is why it’s by far the most popular turbo for our cars. I just removed a turbo kit that cost me over $6k to put an S280 on. lol

 

[hockeyman]

HAHAH
Thanks for the insight I feel like the longevity would be better with a S280 and a medium to aggressive tune with it than a hybrid that’s try hard to push it power but I’m not well traversed in aftermarket turbos

 

[dhminer]

HAHAH
Thanks for the insight I feel like the longevity would be better with a S280 and a medium to aggressive tune with it than a hybrid that’s try hard to push it power but I’m not well traversed in aftermarket turbos

The most reliable stock location/fitting turbo is going to be a Garrett kit such as the GTX2860, but they’re a little more expensive because to do it right you also need a new exhaust manifold as well. They’re also the total opposite of a hybrid in the sense that they have no power at all below 4,000 rpm and aren’t really cooking until 4,500. Once it spools up though, it’s a riot and makes you want to bounce the limiter every shift. This is a somewhat controversial opinion, but Garrett makes OEM quality and uses ball bearings. S280 is hand made in England, which isn’t typically synonymous with high quality, but I’m obviously talking out of both sides of my mouth because I’m removing a Garrett to put an S280. The Garrett is awesome on the street where I can always control where I am in the rev range but on the track it’s a pain in the ass, hence the swap for a broader powerband.

Also, if you stick with a reputable tuner from this forum they won’t let you do anything wild that’ll blow your engine up regardless of which turbo you go with. Unless you ask them to push it to the ragged edge, they’ll keep it safe.