• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


Smalls (A Build)

Messages
237
Likes
103
Location
olathe
#1
So this is my 2014 MO FiST build. I bough it used in 2014 with 900 miles on it. It has/had all the options (nav, sunroof, rado).

I like to call it smalls because obviously it is a small car and when it makes me mad I can just yell 'Your killing me Smalls', instead of something worse around the kids.

I like to do auto-x and track but I am not keen on dragging, so that is how I try to configure it.

Here is my parts list so far as I remember

Wilwood brake kit (all 4 corners) with GT rotors on the front and BP-20 pads for now
2J cowl intake(w/ map extension wires)

4x100 Conversion
Advan RZ Wheels (bronze) in 16x8 +38 (13.6 lbs each)
Direzza II star spec (225/45/16)
See thread here on this setup. http://www.fiestastforum.com/forum/threads/5307-Advan-RZ-16x8-amp-225-45-w-Wilwood-BBK-front-amp-rear-fitment

BC Racing coilovers w/ Swift linear springs
Triple R front spliter w/ carbon fiber wrap
Quaife LSD & Motul fluid (still siting around waiting to go in)
Cobb turbo back exhaust
DHM catless DP
Tial Q BOV
Front & Rear Cobb sway bars
Pierce upper strut bar, 6 point lower stress bar
Boomba shifter & adapter & bushings
Boomba symposer delete
Boomba wing riser
Dead pedal
Raceseng Tow hook / gopro mount

[MENTION=1098]DHM[/MENTION] quick spool kit w/ GT2560R (GTX style billet compressor wheel installed @ Turbo's Direct)
[MENTION=1098]DHM[/MENTION] Race FMIC with garret core upgrade

Currently it makes 350whp on e30, and 320whp on 93oct.
comp.jpg

Here are a few external pictures of the car.

13040998_246410305712221_2076073511705167545_o.jpg

View attachment 9609

DSC03328.JPG

DSC03322.JPG

DSC03325 med.JPG

DSC03324 med.JPG

DSC03323 med.JPG
 


OP
W
Messages
237
Likes
103
Location
olathe
Thread Starter #4
Very Nice!

Hey how is your tuning coming along with the GT2560r ? Its been a while since you posted any updates...
Few bumps, I mentioned in the main post its getting some more hardware upgrades.
 


BoostBumps

4000 Post Club
Staff Member
Messages
4,277
Likes
1,033
Location
Arizona
#5
Few bumps, I mentioned in the main post its getting some more hardware upgrades.
sub'd for updates...

I know by now your probably very eager the finally get this thing wrapped up!
 


OP
W
Messages
237
Likes
103
Location
olathe
Thread Starter #6
sub'd for updates...

I know by now your probably very eager the finally get this thing wrapped up!
Ahh yep... it was my daily driver that I was not going to have any downtime with (yea right). And now it's hasn't even started up in a month. I need to get off my butt and put the Quaife in while I am waiting, perfect time.
 


OP
W
Messages
237
Likes
103
Location
olathe
Thread Starter #9
Just as a reference point, here is where my car was on the old setup (AKA not good enough). This is on 93 pump.

These are all revisions from DHM.

comp.jpg
 


OP
W
Messages
237
Likes
103
Location
olathe
Thread Starter #11
I would be extremely happy with that from just pumped gas. I'm hoping I get anywhere close to that with my Stage 3 pro tune from Randy!
It's not bad. I should be increasing my power everywhere with the new setup, but my main focus is to increase the low-mid range power.
 


Kip2MyLou

2000 Post Club
Messages
2,819
Likes
168
Location
Gaithersburg
#12
It's not bad. I should be increasing my power everywhere with the new setup, but my main focus is to increase the low-mid range power.
Well I'd be extremely happy those numbers. But there's always room for improvement.
 


Sourskittle

4000 Post Club
Messages
4,567
Likes
862
Location
Lakeland
#13
Thanx for sharing. I'm interested to see your new numbers with the external gate as we are fixing to get some feedback on the cyborg turbo with an external. Even 240whp in this car is pretty nice, right?
 


OP
W
Messages
237
Likes
103
Location
olathe
Thread Starter #16
Kit is finished. I'll post some data up when we get it dialed in. Exhaust is black ceramic coated and the other parts are bronze powder coated that Russ @ DHM color matched to my tow hook.

IMG_3727.JPG

12038058_1141910462490881_2310945677102551033_n.jpg

IMG_3651.jpg

12002999_623797205381_5737446705044266132_n.jpg
 


OP
W
Messages
237
Likes
103
Location
olathe
Thread Starter #17
Oh and the intercooler with an upgraded garrett core.

IMG_1945.JPG
 


BoostBumps

4000 Post Club
Staff Member
Messages
4,277
Likes
1,033
Location
Arizona
#18
Nicely done and love the attention to details....Very eager to see results soon!
 


Similar threads



Top