Strobing third brake light.

[Toddcam09]

Has anybody done this?

 

[Grsemky]

Lots, you can buy a flasher module on Amazon and wire it in on maybe 5min

 

[Toddcam09]

Lots, you can buy a flasher module on Amazon and write it in on maybe 5mon

Cool. I noticed the module on amozon.
Thanks for the reply.

 

[TyphoonFiST]

Has anybody done this?

I have a complete list of all the parts needed for this* Mine still lighting away and its been like 6-7 years maybe more.

 

[TyphoonFiST]

Cool. I noticed the module on amozon.
Thanks for the reply.

Found it all*

Here is the link.....

Qiorange Flash Strobe Controller... https://www.amazon.com/dp/B015QQ6YUC?ref=ppx_pop_mob_ap_share

Then these in case I ever wanted to go back

Nilight GA0007 Pin 2Pin Way 16AWG Waterproof Wire 1.5mm Series Terminal Connector-5 Pack,2 Years Warranty https://www.amazon.com/dp/B000GKEXK2/ref=cm_sw_r_cp_apa_i_dfh7CbPAMMJ5M

So I soldered a Male connector to the factory side harness. Then a female to the flasher module. The the other side of the module I soldered a Male in ....then a female to the LED light for the vehicle allowing me to plug in the female to the vehicle Male if I wanted to take out the module and go back to a non blinking system....ya get me?

 

[Toddcam09]

^^^^Cool. Looks like you've done all the hard work/ research.
I appreciate the help!