Just installed my Mountune lower spoiler / spitter and have a few minor concerns

[Strife]

1. I hear slight wind noise when driving, this might be my imagination, but did anyone else with this installed notice this?
2. I've lost one of the bolts that attaches the bumper to the fenders. Does anyone have a Ford part number for this? Or perhaps know of a good substitute I could pick up at Home Depot?
3. If you have this installed, how flush is the center support of the splitter with your bumper? Mine is attached very well, but the center isnt lining up 100%.

 

[GAbOS]

I don't own one myself but would like to ask some qualifying questions.

Where is the new wind noise coming from and how does it sound; woosh, slow hiss, high or low pitch..?

Where is the missing bolt located 'exactly' as this may be contributing to 1.

Got nothing on 3 since there's no detail on how it isn't lining up. Front to rear, left to right. Got pics? ;>

 

[2006ser]

Get the splitter support struts

 

[FistSt215]

I am too interested in this splitter down the road . Maybe get some rod supporters ? Or you could go back under and take a bolt out and take it Home Depot and look for exact bolt . Try contacting mountune maybe they know the size of the bolt .

 

[RAAMaudio]

You will not find the exact bolt at home depot but you can find a bolt long enough and put a flat washer on it.

If you are still using three bolts per side put skip the middle one, it will be fine with two per side actually.

Those of us having rubbing issues grind off the 3rd bolt area so only use 2 bolts, so far I have only gone to 130MPH as I only go real fast on race tracks where I should be doing such things.

 

[Siestarider]

I lost one of mine a while back, next time I had front clip off, I took one of the original bolts to Ace Hardware and found an exact thread and length match, different head size, but it works fine.