Brake light pulsator

[Im_Zee11]

Hey I don't want my ST hit just as much as the next guy Seems like a lot of people come WAY to close recently.

I know what you mean I just got rear ended. It wasn't hard but hard enough to bend my bumper out of aliagment. I have a gap between my bumper and lights almost big enough to fit my finger in there.

 

[TyphoonFiST]

Will do, it should ship tomorrow if that company is on top of orders.

Did it show up?

 

[CanadianGuy]

Will do, it should ship tomorrow if that company is on top of orders.

Did it show up?

let me help getting his attention.

[MENTION=2260]TuxBlack15[/MENTION]

 

[SFP]

Should be here today I'll be off work tonight and see if it works...

 

[bobjob]

I havent bothered to look, how hard is it to get to the wiring of the 3rd brake light?

 

[jeff]

I havent bothered to look, how hard is it to get to the wiring of the 3rd brake light?

Just 2 T20 bolts to open it up. In another members pictures there were several inches of slack so the wire could be pulled out and worked on. Unfortunately for me it was only about 1 inch which made it very difficult to wire up everything, but I made it work.

 

[CanadianGuy]

Just 2 T20 bolts to open it up. In another members pictures there were several inches of slack so the wire could be pulled out and worked on. Unfortunately for me it was only about 1 inch which made it very difficult to wire up everything, but I made it work.

Same here easy to get to but short.

 

[jeff]

Same here easy to get to but short.

I ended up soldering mine because I only was able to get access to about 1cm of each side of the wire. I didn't want to take a chance so I cut it, stripped the wires, soldered them together, and put wire nuts on.

 

[SFP]

Nope the plug in one isn't the right plug!

 

[SFP]

I'm gonna start searching for a plug and make a plug and play model for you all

 

[Manta Ray]

I'm gonna start searching for a plug and make a plug and play model for you all

u make it, ill be your first customer.

 

[Nexus]

Second

 

[CanadianGuy]

u make it, ill be your first customer.

Can I bump in line? But ya plug would be great especially since the cable is not exactly miles long.

 

[briandee]

I'm gonna start searching for a plug and make a plug and play model for you all

I'll front you $50 PayPal for a plug and play.

Sent from my VS985 4G using Tapatalk

 

[bobjob]

I'm in line too if you can get clips. (3d printed?). I also have looked. This module looks interesting with the accelerometer https://www.amazon.com/gp/aw/d/B00N...5745&sr=8-9&pi=SL75_QL70&keywords=brake+pulse

 

[SFP]

I'm looking into the plugs, it's not as easy as you would think but I should be able to find a compatible one. If anyone has a spare rear light I could have for moulding/comparison purposes that might help.

 

[TyphoonFiST]

I'm looking into the plugs, it's not as easy as you would think but I should be able to find a compatible one. If anyone has a spare rear light I could have for moulding/comparison purposes that might help.

I'll say im third/interested in a Unit also....keep me informed...money in hand.

 

[bobjob]

I'm looking into the plugs, it's not as easy as you would think but I should be able to find a compatible one. If anyone has a spare rear light I could have for moulding/comparison purposes that might help.

I cant find the thread but there was that wrecked Fiesta st in SD i think that we could salvage it from probably. And maybe any one that went full track/race spec. Search isnt working for me. If we can find it i wouldn't mind fronting some money to mock up some clips

 

[cbizz]

Interested as well, almost got rear-ended on my way to work this morning.

 

[bobjob]

https://www.fordparts.com/Commerce/...&search=true&year=2014&make=Ford&model=Fiesta

I dunno how to describe/search for the connector for this. if we can get a part number for it that may help.