(2015 Fiesta ST180)
Hey guys. I had a noticeable metallic rubbing / clicking noise coming from my rear brakes a couple of weeks ago. It would quieten down after a few stops but was still noticeable. It would become louder and more frequent if I slightly applied the brakes.
I suspected it was a sticking calliper and when it went in last week for a service, they put it down as warped rotors on both sides. They replaced pads and rotors and the noise had gone.
I woke up the next day and drove my car and the metallic clicking noise was back. But after one or two stops it had COMPLETELY gone... before it would never go away but just get less noisy. Now there is no noise what so ever off the rear brakes although if the car has been sitting over night and it RAINS, the metallic rubbing / clicking noise returns when brakes AREN'T applied and then stops after a few brakes.
Sounds similar to this vvv
View: https://www.youtube.com/watch?v=6UsQ8W7994g&list=LL&index=108
They re-greased slider pins at service so confused at what else could be causing the issue?
Any ideas what it could be?
Hey guys. I had a noticeable metallic rubbing / clicking noise coming from my rear brakes a couple of weeks ago. It would quieten down after a few stops but was still noticeable. It would become louder and more frequent if I slightly applied the brakes.
I suspected it was a sticking calliper and when it went in last week for a service, they put it down as warped rotors on both sides. They replaced pads and rotors and the noise had gone.
I woke up the next day and drove my car and the metallic clicking noise was back. But after one or two stops it had COMPLETELY gone... before it would never go away but just get less noisy. Now there is no noise what so ever off the rear brakes although if the car has been sitting over night and it RAINS, the metallic rubbing / clicking noise returns when brakes AREN'T applied and then stops after a few brakes.
Sounds similar to this vvv
They re-greased slider pins at service so confused at what else could be causing the issue?
Any ideas what it could be?
Last edited: