• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


Anyone Running an eBay intercooler?

Messages
595
Likes
404
Location
Chicago, IL, USA
#2
I have one sold by a different vendor that cost me $245 during the summer of 2014. Much larger than the OEM and the fit was tight, but I didn't have to trim anything. I don't know where that extra plate was supposed to. Never got around to testing the performance as I was to lazy to figure out how to data log with the COBB AP.

FMIC comparison.jpg
 


OP
R
Messages
47
Likes
9
Location
California
Thread Starter #3
I have one sold by a different vendor that cost me $245 during the summer of 2014. Much larger than the OEM and the fit was tight, but I didn't have to trim anything. I don't know where that extra plate was supposed to. Never got around to testing the performance as I was to lazy to figure out how to data log with the COBB AP.

View attachment 69296
Did it feel any different as far as performance compared to stock intercooler?
 


Intuit

4000 Post Club
Messages
4,268
Likes
2,800
Location
South West Ohio
#9
^ interesting site

Anyone done any screening to help keep their pretty new IC fins from getting bent-over and dinged up like the OEM? If so, what solution did you use or come up with?

.,
 


Messages
96
Likes
68
Location
GA
#10
I have one of those eBay intercoolers. Looks a lot (identical?) like this Mishimoto intercooler, right down to the tabs and shield thingy (which I didn't use, either). It's definitely bigger than the stocker. I don't know about performance differences because I wasn't monitoring things with the stock intercooler.
Fit nicely in place of the stock one and seems to work just fine.
 


Last edited:

XanRules

Active member
Messages
704
Likes
368
Location
Portland
#12
I don't think I have that exact one, but about ten years ago on the Mustang forums some guy did a side by side analysis of the Mishimoto intercooler and an eBay one (like @killer5280 is alluding to). He had access to some pretty advanced tools and concluded that they were exactly the same piece and likely even made in the same factory. They were completely identical in every way except for one saying MISHIMOTO on it.

Whichever one that was - I'd have to dig through my emails from a long time ago - I've had it on the car since maybe mid-2018 with absolutely zero problems.
 


Grsemky

Member
U.S. Navy Veteran
Messages
392
Likes
320
Location
Arizona
#13
I have a similar knockoff from eBay, it fits in stock location but it's snug... I tracked temps before and after and I stay about 20⁰ cooler than when I had the factory intercooler in... I rarely get to 10⁰ above ambient
 


Last edited:
OP
R
Messages
47
Likes
9
Location
California
Thread Starter #14
I don't think I have that exact one, but about ten years ago on the Mustang forums some guy did a side by side analysis of the Mishimoto intercooler and an eBay one (like @killer5280 is alluding to). He had access to some pretty advanced tools and concluded that they were exactly the same piece and likely even made in the same factory. They were completely identical in every way except for one saying MISHIMOTO on it.

Whichever one that was - I'd have to dig through my emails from a long time ago - I've had it on the car since maybe mid-2018 with absolutely zero problems.
Awesome info thank you!
 


OP
R
Messages
47
Likes
9
Location
California
Thread Starter #15
I have a similar knockoff from eBay, it fits in stock location but it's snug... I tracked temps before and after and I stay about 20⁰ cooler than when I had the factory intercooler in... I rarely get to 10⁰ above ambient
Awesome thanks!
 


Messages
96
Likes
68
Location
GA
#16
I don't think I have that exact one, but about ten years ago on the Mustang forums some guy did a side by side analysis of the Mishimoto intercooler and an eBay one (like @killer5280 is alluding to). He had access to some pretty advanced tools and concluded that they were exactly the same piece and likely even made in the same factory. They were completely identical in every way except for one saying MISHIMOTO on it.

Whichever one that was - I'd have to dig through my emails from a long time ago - I've had it on the car since maybe mid-2018 with absolutely zero problems.
Pretty clear to me that they are the same item.
 


TyphoonFiST

9000 Post Club
Premium Account
Messages
11,972
Likes
8,404
Location
Saint Pauly
#17
The OEM Intercooler is Tube and Fin* most aftermarket ones are Bar and Plate. Bar and plate is the better option. Read up my friend.
 


OP
R
Messages
47
Likes
9
Location
California
Thread Starter #18
The OEM Intercooler is Tube and Fin* most aftermarket ones are Bar and Plate. Bar and plate is the better option. Read up my friend.
I’ve read about intercoolers and know that bar and plate is better. I know the Mishi unit is still tube and fin.
I just wanted to know if anyone has positive experience with the eBay units and actual results whether good or bad.

I think I will just spend the extra $100 and get a v1 whoosh unit.

I used to have an srt4 and I know that the cx racing units on ebay were good and had good results and performed well. I was just wondering if there were similar results from eBay for the Fist.
 


Grsemky

Member
U.S. Navy Veteran
Messages
392
Likes
320
Location
Arizona
#19
I’ve read about intercoolers and know that bar and plate is better. I know the Mishi unit is still tube and fin.
I just wanted to know if anyone has positive experience with the eBay units and actual results whether good or bad.

I think I will just spend the extra $100 and get a v1 whoosh unit.

I used to have an srt4 and I know that the cx racing units on ebay were good and had good results and performed well. I was just wondering if there were similar results from eBay for the Fist.
I have nothing but praise for my eBay special, it's a clone of the cobb(dimensions are identical) and is bar and plate
 


Messages
96
Likes
68
Location
GA
#20
I’ve read about intercoolers and know that bar and plate is better. I know the Mishi unit is still tube and fin.
I just wanted to know if anyone has positive experience with the eBay units and actual results whether good or bad.

I think I will just spend the extra $100 and get a v1 whoosh unit.

I used to have an srt4 and I know that the cx racing units on ebay were good and had good results and performed well. I was just wondering if there were similar results from eBay for the Fist.
Most of those eBay units say they are bar and plate construction, including the one I bought so maybe it's not identical to the Mishimoto unit in spite of the fact that they look the same.
I looked a little closer and there are visible differences between the Mishimoto units and the eBay ones.
 


Last edited:

Similar threads



Top