Been reading this forum for an answer and could not find anything, sorry if I missed the thread. I have bled the brakes 2 ways. One with a helper and one with Forscan. The pedal will not return and all four wheels are locked up after pressing the brake to start the car. The pedal is stuck where normal braking would occur. Is this a master cylinder or something else?
-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
Brake Pedal stuck down
- Thread starter Frunobulax
- Start date
Haven't had this happen before (nor remember reading about it), but that certainly seems like a master cylinder issue.
Have you tried cracking the lines at the master to see if the calipers release? Almost seems like with the combination of the calipers locking and the pedal not returning that either the master (or maybe ABS module?) are not allowing fluid to flow backwards (back into the master).
Have you tried cracking the lines at the master to see if the calipers release? Almost seems like with the combination of the calipers locking and the pedal not returning that either the master (or maybe ABS module?) are not allowing fluid to flow backwards (back into the master).
Similar threads
-
-
-
FS Brand new clutch pedal and master cylinder assembly + brake booster vacuum hose
- Started by Digiadaamore
- Replies: 3
-
Brake Pedal Soft, Poor Pedal Response, Suggestions Needed, Deep Into the Problem Already....
- Started by slyez
- Replies: 36
-
-
Clutch pedal not returning, Leak, Have brakes
- Started by misteelheader
- Replies: 2
-
Clutch pedal not returning, Leak, Have brakes
- Started by misteelheader
- Replies: 3
-
-
Cobb shift knob, dead pedal, battery tie down, camber bolts, evap protector, brake lines
- Started by mweidner311
- Replies: 10
-
Broken Brake Pedal Switch (P0504)- Started by justinsane
- Replies: 0
