• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


16x8" RPF1s ARE IN STOCK! ~ ORDER NOW!

Trader history for OAKOS Automotive (0)

M-Sport fan

9000 Post Club
Messages
14,000
Likes
6,697
Location
Princeton, N.J.
#21
These will fit fine at stock height and on moderate lowering springs with a 205 to 215 tire.
If you want to run a 225 you may start having issues with the inner fender tab if lowered more than 1" or so. (assuming you're on coilovers at that point)
This largely comes down to tire size, and unfortunately not all 205-225s are created equal so it varies.

We are planning on running the Falken RT660 in a 215/45 and Mountune springs on our car.
The RT660 runs wide and in a 215, is more comparable to other 225s.
Expecting this fitment:
View attachment 32486
From this thread: https://www.fiestastforum.com/threads/advan-rz-16x8-225-45-w-wilwood-bbk-front-rear-fitment.6007/
It would be sweet if you could get Advan to bring in THOSE wheels for our direct fitment. [wink] [thumb]
 


kevinatfms

Senior Member
Messages
870
Likes
914
Location
Germantown
#23
This largely comes down to tire size, and unfortunately not all 205-225s are created equal so it varies.
We are planning on running the Falken RT660 in a 215/45 and Mountune springs on our car.
The RT660 runs wide and in a 215, is more comparable to other 225s.
Nolan
OAKOS Automotive
The RT660 is just as wide as any other of the 215 offerings and is actually .1 thinner than the outgoing RT615K+ at 7.5" tread width.

Its also funny that the Federal RS-Pro in a 205/45 is actually WIDER by .2 than the Falken, BFG offerings in 215.

225's(measured at 8" tread width) are the best option but the damn height kills us. Would love a 225(8" tread width) in a 23.5" tall tire(would be between a 40-45 aspect ratio) but no one makes one. So, i guess coilovers are required to prop the car up a bit to clear everything within the fender.
 


M-Sport fan

9000 Post Club
Messages
14,000
Likes
6,697
Location
Princeton, N.J.
#24
Sadly, most (if not ALL) coil over kits for these cars out there will not even allow you to get the car high enough to clear an, 8" wide, 24.0"/24.1" tall tire. [:(] [mad]
 


kevinatfms

Senior Member
Messages
870
Likes
914
Location
Germantown
#25
Sadly, most (if not ALL) coil over kits for these cars out there will not even allow you to get the car high enough to clear an, 8" wide, 24.0"/24.1" tall tire. [:(] [mad]
I plan on putting 225's on mine once i wear my 205s out. I am currently on B8's and Swift springs. Ive measured everything possible from my current setup and i believe it will clear without any "massaging" of anything. The good thing is if i need a little bit of space, the Bilstein B14 kit i already planned on buying can give me a little height back if needed at the top end of its adjustment range.

So ill make a thread when i start the process. The extra 5mm of offset from the RPF's would be more beneficial over my Dekagrams.
 


M-Sport fan

9000 Post Club
Messages
14,000
Likes
6,697
Location
Princeton, N.J.
#26
^^I wish that you could try them first with the B8/Swift setup, since I have another set of Dekas with 225/45-16 A052s to go on them, and I am worried that they will rub even on the factory suspension. [wink]
 


OP
OAKOS Automotive

OAKOS Automotive

Senior Member
Vendor
Messages
834
Likes
112
Location
Sterling Heights, MI, USA
Thread Starter #29
Production is finished and the wheels will be headed over from Japan soon!
We are 4 - 6 weeks out from delivery.

Half of the pre-order slots are sold.
 


OP
OAKOS Automotive

OAKOS Automotive

Senior Member
Vendor
Messages
834
Likes
112
Location
Sterling Heights, MI, USA
Thread Starter #32
(plz excuse our dirty car)

Here they are!
Tested front and rear and looking great. No concerns with clearance anywhere.



These are now in stock and ready to ship! Shoot me a PM or email about ordering with forum pricing.
Pre-orders have been shipped as well.

IMG_0895.JPG

IMG_0896.JPG
IMG_0897.JPG

IMG_0898.JPG
IMG_0900.JPG
IMG_0901.JPG
IMG_0902.JPG
IMG_0903.JPG
IMG_0904.JPG
IMG_0905.JPG
 




Top