BEST Lug Nuts for TD 1.2's in 15x7???

[ST-even]

So my new wheel setup on my magnetic grey fist will be some anthracite TD 1.2's in 15x7. Do any other 1.2 wheel owners have lug nut suggestions? This is my first set of new wheels and I just want to know the best options out there. Any help would be appreciated

 

[Plainrt]

Muteki sr35 non spline drive ones

 

[kivnul]

I like my McGards. I got a kit that has enough nuts so you can choose to use locks or not.

https://smile.amazon.com/gp/product/B001P281RQ

I also have 1.2's in Anthracite. These blend in unless you look close.

 

[Capri to ST]

Muteki sr35 non spline drive ones

I have the Muteki SR35's on my other car and like them a lot. I thought about getting them for my TD 1.2's but had one reservation. On another thread someone noted their package says the maximum torque allowed for them is 80 lb. ft., and our car requires 100 lb. ft.-
http://www.fiestastforum.com/forum/threads/13896-Muteki-lug-nut-torque

I'd be interested to hear from others who have used Muteki SR35's on TD 1.2's. A few folks on that thread have used them.

 

[Adub]

+1 on the mcgard spline drive. I have the same kit. However, the only linked above is the 5 lug kit. They do make a 4 lug kit that is about 15 - 20 bucks cheaper.

 

[ST-even]

Thanks for the input everyone!

 

[SkirataST]

And without those shitty aluminium caps over the nut.

 

[anticon]

I got the gorillas in my signature mainly based on a RAAMAudio recommendation. So far so good.

 

[Capri to ST]

I like my McGards. I got a kit that has enough nuts so you can choose to use locks or not.

https://smile.amazon.com/gp/product/B001P281RQ

I also have 1.2's in Anthracite. These blend in unless you look close.

I'm also thinking about the McGard spline drives, and am looking at these. For those that got them, did you feel it would be difficult to get a socket on regular lug nuts with the TD 1.2's, or would scratch up the lug recesses?-
http://www.mcgard.com/product/chrom...Ford&vehicle_model=Fiesta&vehicle_category=24

 

[ST-even]

UPDATE:

so I placed my order for my 1.2’s. Just need to decide on lugs. I want Mcgards but I’m still confused on part numbers. I believe for our cars we need M12x1.5. But some of the part numbers on the lug nut thread don’t seem to fit the fiST when I pull them up on amazon? Can someone just post some links of ones that truly fit the fiST?

 

[kivnul]

I use this kit: 65557BK

https://smile.amazon.com/gp/product/B001P281RQ
It has 4 regular nuts and 1 locking per wheel so I can choose when to lock my wheels.

If you want a kit with 3 regular nuts and 1 locking per tire get these: 65457BK

https://www.amazon.com/gp/product/B001P2F5UM

 

[ST-even]

I use this kit: 65557BK

https://smile.amazon.com/gp/product/B001P281RQ
It has 4 regular nuts and 1 locking per wheel so I can choose when to lock my wheels.

If you want a kit with 3 regular nuts and 1 locking per tire get these: 65457BK

https://www.amazon.com/gp/product/B001P2F5UM

Thank you Thank you Thank you.
I just placed my order!