Dead Hook Motorsports Factory Fitment Intercooler!!!

[Etyrnus]

Russ, you've been awesome, no worries from me. Now I'm just itching to get mine installed!

 

[Xtreme545]

I just dont under stand it. Maybe i should make them to heavy to throw... UPS is out of control. by the end of this i will be out money lol. Shit sucks. I go buy brand new boxes and tape from a packaging supply place and there shit lol. Ugh its been a ruff last few months ill be glad when all you guys are enjoying your intercoolers.

Russ

Well I'm loving mine, ambient temp was 88* this evening and with some somewhat aggressive driving, charge temp peaked at 94.6 degrees [emoji106]????

 

[scenicroadways]

Can't wait till mine ships... Hoping the short journey from MI to WI will let it arrive with minimal UPS abuse!

 

[DHM1]

Can't wait till mine ships... Hoping the short journey from MI to WI will let it arrive with minimal UPS abuse!

Oh new boxes will be used on the next set. Not doing this again.

Russ

 

[Xtreme545]

Mine arrived, not in prestine condition, but zero damage to intercooler inside

 

[BronxBomber]

Pm'd . Thanks Russ. We know you're swamped, but appreciate your work and dedication on thus forum and with your great parts and service.

 

[Svvift]

Wasn't trying to aggravate you. The intercooler is immaculate. And the tear was just on the outer layer, not all the way through. About to start bolting it up. Just taking my sweet time.

 

[DHM1]

Wasn't trying to aggravate you. The intercooler is immaculate. And the tear was just on the outer layer, not all the way through. About to start bolting it up. Just taking my sweet time.

No not any of yours guys fault. I need this feed back. Just venting hahaha I am human right? Lol anyway I just excited to see a few of you enjoying them can't wait for more to get bolted up

Russ

 

[rodmoe]

No not any of yours guys fault. I need this feed back. Just venting hahaha I am human right? Lol anyway I just excited to see a few of you enjoying them can't wait for more to get bolted up

Russ

Wait What ?? A Cyborg Tig master is Human too ??

 

[Svvift]

got everything all put back together..

and then realized its just a tad off center (slightly too far to the passenger side)
oh well.

having a helper when mounting it would be beneficial. i used a floor jack to raise it into place.

no test drive yet, since my mbrp is against HOA rules or something. we have gotten complaints about "too loud of exhaust" lol... but is it the FiST or the SVTF? lol

 

[Kip2MyLou]

got everything all put back together..

and then realized its just a tad off center (slightly too far to the passenger side)
oh well.

having a helper when mounting it would be beneficial. i used a floor jack to raise it into place.

no test drive yet, since my mbrp is against HOA rules or something. we have gotten complaints about "too loud of exhaust" lol... but is it the FiST or the SVTF? lol

Is it off center because that's the why it's made or you didn't line it up? Just wondering for when my time comes.

 

[Svvift]

just from the way i tightened up the brackets...
sorry, should have clarified

 

[DHM1]

just from the way i tightened up the brackets...
sorry, should have clarified

Maybe I didn't mention before but I thought I did you should be able to tighten them up straight before the install. But the car looks great!

Russ

 

[Kip2MyLou]

Okay thanks for reply. I'll keep that in mind when I help my mechanic. Ha.

 

[Etyrnus]

Maybe I didn't mention before but I thought I did you should be able to tighten them up straight before the install. But the car looks great!

Russ

So the bracket arms should line up straight?

 

[Svvift]

It was just me Not giving it 100% of my attention. But thanks!

I bolted the bracket to the frame first so I could shift it slightly back and forth to align it and just didn't do a good job keeping it centered. Lol.

Now I need to make my custom lower grill

 

[Svvift]

Oh and racheting wrenches made this a whole lot easier, at least in my case.

 

[Dustys318]

Maybe I didn't mention before but I thought I did you should be able to tighten them up straight before the install. But the car looks great!

Russ

Is the race IC the same width as this IC and just taller?

Dusty

 

[Svvift]

Ok, so first impression, I love it. Didn't get on it too hard this morning but it sure felt quicker. Could be somewhat placebo effect, and it was also cooler this morning than it has been. Its definitely keeping the temps down.
I have all the bolt ons required for a stage 3 tune while still on the factory tune. Lol.

I will be tuned soon and can then report on the actual temps.

 

[scenicroadways]

Hi Russ, I know you are busy but just wondering if you have a ballpark ETA on shipping the "2nd round" of intercoolers? I think I'm just too excited from all these pics being posted.