-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
SLD ECOBEAST billet badges
- Thread starter pelotonracer2
- Start date
- Status
![[cool]](/images/smilies/icon_smile_cool.gif "Cool [cool]"){kind=icon}
I had a feeling.
![[raceflag]](/images/smilies/icon_smile_race.gif "Race Flag [raceflag]"){kind=icon}
I also received a tracking number today...
And while I'm very pleased that Chris is very forthright and honest, I was kinda dissapointed to hear he still chose to send me out one of less than perfect badges as I am extremely picky about these details (damn OCD)...But in all fairness, He did bring it my attention and said he'd make it right If I was 100% satisfied after I received it...
[HR][/HR]
"Oh, I forgot about this:
So, yours was one of a couple badges where I didn't do a particularly good job of getting all the powder off of the non-letter surfaces before curing it. As such, the bottom edge has a small section of powder that cured onto it that I wasn't able to remove when I hand polished it. (And unfortunately, I didn't even notice until I GOT to the hand-polishing stage.) Luckily it's not visible from the face and something that only you would ever notice. In the interest of time I'm going to send you the badge as-is, but I know that some people are a lot more picky than I am, so here's what I want to do:
- Look at the badge when it arrives. If the imperfection is not something you're willing to accept or live with, let me know right away and I will replace it at no cost to you. Ideally I'd rather *not*, but this is something I screwed up and will bite the bullet on if need be.
-Chris"
[HR][/HR]
Here is the pic Chris send along with the message above....If this is the only area where there is a slight powder coat splatter then it really won't be noticeable when mounted...
And while I'm very pleased that Chris is very forthright and honest, I was kinda dissapointed to hear he still chose to send me out one of less than perfect badges as I am extremely picky about these details (damn OCD)...But in all fairness, He did bring it my attention and said he'd make it right If I was 100% satisfied after I received it...
[HR][/HR]
"Oh, I forgot about this:
So, yours was one of a couple badges where I didn't do a particularly good job of getting all the powder off of the non-letter surfaces before curing it. As such, the bottom edge has a small section of powder that cured onto it that I wasn't able to remove when I hand polished it. (And unfortunately, I didn't even notice until I GOT to the hand-polishing stage.) Luckily it's not visible from the face and something that only you would ever notice. In the interest of time I'm going to send you the badge as-is, but I know that some people are a lot more picky than I am, so here's what I want to do:
- Look at the badge when it arrives. If the imperfection is not something you're willing to accept or live with, let me know right away and I will replace it at no cost to you. Ideally I'd rather *not*, but this is something I screwed up and will bite the bullet on if need be.
-Chris"
[HR][/HR]
Here is the pic Chris send along with the message above....If this is the only area where there is a slight powder coat splatter then it really won't be noticeable when mounted...
OP
Thread Starter
#207
Thread Starter
#207
Nice! I found this item on an E-bay auction after finding some pics of it on google images. I sent him a message and the rest is history. Hope everyone likes the badges. I think they are kinda cool myself.
Yeah and just think, this is not his full time job. He's a Focus ST owner and just does this on the side. He makes stuff for the WRX crowd too.![[:D]](/images/smilies/biggrin.png "Big Grin [:D]")
Yeah and just think, this is not his full time job. He's a Focus ST owner and just does this on the side. He makes stuff for the WRX crowd too.
OP
Thread Starter
#208
Thread Starter
#208
I also received a tracking number today...
And while I'm very pleased that Chris is very forthright and honest, I was kinda dissapointed to hear he still chose to send me out one of less than perfect badges as I am extremely picky about these details (damn OCD)...But in all fairness, He did bring it my attention and said he'd make it right If I was 100% satisfied after I received it...
[HR][/HR]
"Oh, I forgot about this:
So, yours was one of a couple badges where I didn't do a particularly good job of getting all the powder off of the non-letter surfaces before curing it. As such, the bottom edge has a small section of powder that cured onto it that I wasn't able to remove when I hand polished it. (And unfortunately, I didn't even notice until I GOT to the hand-polishing stage.) Luckily it's not visible from the face and something that only you would ever notice. In the interest of time I'm going to send you the badge as-is, but I know that some people are a lot more picky than I am, so here's what I want to do:
- Look at the badge when it arrives. If the imperfection is not something you're willing to accept or live with, let me know right away and I will replace it at no cost to you. Ideally I'd rather *not*, but this is something I screwed up and will bite the bullet on if need be.
-Chris"
[HR][/HR]
Here is the pic Chris send along with the message above....If this is the only area where there is a slight powder coat splatter then it really won't be noticeable when mounted...
View attachment 6491
And while I'm very pleased that Chris is very forthright and honest, I was kinda dissapointed to hear he still chose to send me out one of less than perfect badges as I am extremely picky about these details (damn OCD)...But in all fairness, He did bring it my attention and said he'd make it right If I was 100% satisfied after I received it...
[HR][/HR]
"Oh, I forgot about this:
So, yours was one of a couple badges where I didn't do a particularly good job of getting all the powder off of the non-letter surfaces before curing it. As such, the bottom edge has a small section of powder that cured onto it that I wasn't able to remove when I hand polished it. (And unfortunately, I didn't even notice until I GOT to the hand-polishing stage.) Luckily it's not visible from the face and something that only you would ever notice. In the interest of time I'm going to send you the badge as-is, but I know that some people are a lot more picky than I am, so here's what I want to do:
- Look at the badge when it arrives. If the imperfection is not something you're willing to accept or live with, let me know right away and I will replace it at no cost to you. Ideally I'd rather *not*, but this is something I screwed up and will bite the bullet on if need be.
-Chris"
[HR][/HR]
Here is the pic Chris send along with the message above....If this is the only area where there is a slight powder coat splatter then it really won't be noticeable when mounted...
View attachment 6491
![[:)]](/images/smilies/smile.png "Smile [:)]")
![[like]](/images/smilies/icon_smile_like.gif "Like [like]"){kind=icon}
![[thumb]](/images/smilies/icon_smile_thumb.gif "Thumbs Up [thumb]"){kind=icon}
![[:(!]](/images/smilies/icon_smile_angry.gif "Angry [:(!]"){kind=icon}
![[woot]](/images/smilies/icon_smile_woot.gif "Woot! [woot]"){kind=icon}
- Status
Similar threads
-
Last Call! Anembo billet aluminum intake manifolds- Started by ron@whoosh
- Replies: 3
-
Anembo Engineering billet intake manifold 2014-2019 Fiesta ST- Started by Old Mike Emerson
- Replies: 5
-
[track/circuit] Video : my Fiesta ST300 EcoBeast Vs Racing Car 308 Cup- Started by ST-eph
- Replies: 6
-
-
-
-
-
-
ECOBEAST badges in group buy section- Started by pelotonracer2
- Replies: 0
-
