- Member ID
- #17180
- Messages
- 26
- Likes
- 53
Does anybody have any recommendations or advice on paint repair around the rear wheel wells. I know I'll need sanding, priming, painting, and clear coat, but is there anything else? This won't be a perfect repair, but I'm hoping to at least slow down the rust spread.
The drivers side is much worse because the inner fender is separating, so it might be difficult to fully repair that considering I don't own a welder. The paint bubbling underneath the fender protection is also worrying.

The drivers side is much worse because the inner fender is separating, so it might be difficult to fully repair that considering I don't own a welder. The paint bubbling underneath the fender protection is also worrying.





Attachments
-
1.9 MB Views: 0