Hi forum,
Installed F4545 hybrid turbo a few weeks ago. Boost builds like stock but maxes out at 12.5ish psi..
I've tightened all hose clamps (Intake, FMIC/charge pipe, near throttle body) and some bolts (BPV, downpipe). I've done a boost leak test with smoke (homemade smoke maching) and found no leaks.
My AFR numbers are normal when not on boost (14.3-14.7).
WGA is non-oem and set to 11lbs.
I have a base tune from Tune+ running but no revisions, yet.
I'm a newbie to automotive/mechanical work. I'm surprised I got the turbo installed and everything running, lol. Been doing a fair bit of searching and learning/reading on the forum since the install and I'm at a loss as to what to do next!
Any help would be appreciated
Installed F4545 hybrid turbo a few weeks ago. Boost builds like stock but maxes out at 12.5ish psi..
I've tightened all hose clamps (Intake, FMIC/charge pipe, near throttle body) and some bolts (BPV, downpipe). I've done a boost leak test with smoke (homemade smoke maching) and found no leaks.
My AFR numbers are normal when not on boost (14.3-14.7).
WGA is non-oem and set to 11lbs.
I have a base tune from Tune+ running but no revisions, yet.
I'm a newbie to automotive/mechanical work. I'm surprised I got the turbo installed and everything running, lol. Been doing a fair bit of searching and learning/reading on the forum since the install and I'm at a loss as to what to do next!
Any help would be appreciated