How screwed am I? Downpipe to engine bracket.

[RGDfleet]

How screwed am I?

Fitting the Mountune engine mount, right at the end I managed to snap this bolt/screw that helps connect this bracket between the exhaust manifold to the engine. Must’ve over-torqued it… doh…

Any idea if this will be a big issue? Go to a mechanic ASAP or not?

Even if they/I get it out, I’ve got no idea how to get a new screw in that gap, as the bracket is welded to the manifold… oops. Any help much appreciated!!

 

[atlantaM3]

I would say not a big issue personally, as there is a still a bolt to mount the cat. This is immaterial to the load on the engine mount.

 

[lemonjs]

The one remaining bolt will be fine. This bracket takes some of the weight of the downpipe so it’s not all hanging off the turbo.

I’ve seen a few people remove this entirely so there’s less NVH. You’ll be fine!

 

[Sam4]

Snapped it years ago - it holds the front pipe in place....slightly.