MAPerformance : E-tuning Review Thread!

pelotonracer2

1000 Post Club
Member ID
#517
Messages
1,437
Likes
315
It is just a peak, it doesn't hold it. Different load scenarios create different boost especially peak. He might see a spike of 26, but it will immediately down to 24psi as he goes through the RPM.

My target boost is 24psi on pump gas cars. 25-26 on E30, even though the real benefit of the E30 is running more timing.
I only see the 25-26 psi if I am at around 2200-2300 rpm and hit it in 3rd or 4th gear. I'm lucky to see a peak of 22psi when running through the gears. I've learned though that if you are going to run someone from a punch from at around 35-40 mph, starting in 3rd instead of 2nd helps a BUNCH lol [:p]
 


Kip2MyLou

2000 Post Club
Member ID
#568
Messages
2,819
Likes
168
Just got my final revisions from adam for 93 gas with my current mods and it's awesome. Just hit 25 psi last night for the first time. So smooth too.

And Adam is a good dude. He saved me 500 bucks by telling me there's no need for a downpipe. I find that impressive because I know he could have just told me it's worth it and offer MAPs downpipe as a choice, but he didnt. I appreciate the honesty.
 


airjor13

2000 Post Club
Member ID
#18
Messages
2,751
Likes
426
Here is how awesome Adam is, like I don't wax poetics enough anyways :)

Had an ST dyno day today, put the car on the dyno but all my maps had LC enabled which messed gave some issues on the dyno cause the rear wheel is not spinning.

Emailed Adam at noon with a request for a map without LC, got a call back from him within 40 mins, had a new map within an hour. Saved my dyno day slot!

He took time out from his day just to help me with my trival request, good dude for sure, like you guys didn't know already [twothumb]
 


OP
maperformance

maperformance

Active member
Member ID
#2953
Messages
701
Likes
258
Thread Starter #165
Thank you for the kind words guys! Jon, you have my phone number now. Try to limit the amount of XXX pictures you are going to want to send over.
 


J2FoRS

Senior Member
Member ID
#169
Messages
819
Likes
186
Hey everyone. I am no longer working for Modern Automotive Performance. I have reached out to the mods to update this thread with my contact information however here it is for now.

[email protected]
www.facebook.com/500whp
Uh oh :-/

Where does this leave things for us with things on order? Who should we contact? And are you with another company or will be doing your own tuning etc?
 


Member ID
#3307
Messages
377
Likes
113
Another happy ST owner checking in. Adam's tunes are simply the best in the Fiesta world, I know for a fact I would not be enjoying my car as much as I do if it weren't for Adam and his expertise. Currently on my third revision, power is so smooth and there's plenty of it. Thanks Adam!
 


Chris G

Active member
Member ID
#1452
Messages
779
Likes
110
Well that sucks. I was just getting ready to contact MAP for an AP.
 


Kip2MyLou

2000 Post Club
Member ID
#568
Messages
2,819
Likes
168
Well I'm amusing he will still be doing revisions. Unless he's completely changed job fields.
 


koozy

3000 Post Club
Member ID
#22
Messages
3,219
Likes
1,911
wondering how this will affect FiST product development, since it seemed like Adam was driving it. And where does this leave those that purchased lifetime tunes?
 


Kip2MyLou

2000 Post Club
Member ID
#568
Messages
2,819
Likes
168
This better not be a damn fswerks situation again. Because I paid for lifetime tunes and I'd personally be upset if that wasn't upheld. Hopefully adam chimes in soon.
 


J2FoRS

Senior Member
Member ID
#169
Messages
819
Likes
186
This better not be a damn fswerks situation again. Because I paid for lifetime tunes and I'd personally be upset if that wasn't upheld. Hopefully adam chimes in soon.
I'd assume that "someone" will honor the lifetime tunes through MAP. Unless they were always directly bought through Adam in which case I'm sure he will still be doing it since he is still listing himself as a Cobb Pro Tuner on Facebook.

I'm concerned about the products I have on order as well as the current R&D threads just dying. I'm going to wait for Adam to shed some light for us but if not in the morning I'm going to call and see about cancelling my order I think.
 


Kip2MyLou

2000 Post Club
Member ID
#568
Messages
2,819
Likes
168
That it did, we left on good terms and we agreed to work together in the future.



Your order is fine, it is in the system and the products are being produced. The only thing this will hinder is the development of the turbo kit. I'm not sure if they are still going to work towards it as my vehicle was the R&D Vehicle. IF they want to move forward I'm still on board to help develop and do the tuning required. I'm a very easy going guy.



Thank you for the kind words!



You still can, and you will still receive the custom tune that it comes with. I set them up with the tune files, and I am available for assistance to get it squared away.



Nope still here, I plan on focusing 100% on calibration development, not just part time. So this is good news for everyone that was looking to get some tuning.



I will have some more information on this within the next day or two.



Feel free to continue our email love exchanges via the contact information I posted on the previous page!



I had a hockey game tonight, sorry I didn't back sooner. You can now sleep at night ;) haha.



No need, you will be good! Hang tight as I know they are a little backed up in CNC operations right now and they needed to cut the BOV block offs and the MAP sensor flanges for the cold pipe.
Sounds awesome man. Thanks for update and sorry for the amount of replies but you can't just say things like that and not expect an uproar. Haha.
 


Member ID
#3331
Messages
125
Likes
24
Nope still here, I plan on focusing 100% on calibration development, not just part time. So this is good news for everyone that was looking to get some tuning.

Thanks for the update and FB addition. I can rest easy now. I will wait till you settle in and then order a AP.
 


Member ID
#1883
Messages
361
Likes
78
Tune+ said:
Feel free to continue our email love exchanges via the contact information I posted on the previous page!
That's more like it! We haven't talked about one of my meals in some time. Expect to hear about all of them since our last exchange, in chronological order, soon. In the meanwhile, I have tuning money electronically burning a hole through my proverbial e-pocket.
 


Member ID
#3535
Messages
456
Likes
297
I see Panda got back to you, or the dispute went in your favor?
 


Similar threads



Top