P04DB

[ConnorFist18]

Just installed a 2j cai, drove around for a few minutes and got the p04DB code a few others that have installed the 2j intake have got that as well how do I solve this.

 

[Raziel510]

Make sure all your evap hoses are connected. Check all hoses on the intake are snug and every electric connector is connected.

 

[ConnorFist18]

Make sure all your evap hoses are connected. Check all hoses on the intake are snug and every electric connector is connected.

I just realized, I watched a video and the dude needed an adapter for the fiesta 16+ mine is a 18. The adapter connects to the bottom of the intercooler hose meets in the T fitting and connects to a hose that reaches to the intake. I removed the evap line from the intercooler hose side and plugged the nub me and my pops thought it seemed odd they didn’t supply a proper fitting. So I gotta cut the T fitting line on the oem and replace it with the after market intake line correct ? And I’ve driven the car 2 days not intentionally knowing I made a mistake but what’s the severity of the code until I get the adapter

 

[TyphoonFiST]

Id be getting my tune adjusted also due to this mod*

 

[ConnorFist18]

Id be getting my tune adjusted also due to this mod*

Jason from dizzy tuning before I got the intake I asked him if I’d need an additional tune with the install and he told me I was good to go I specified which intake I got and all maybe data log and send to him even after his first answer ?

 

[TyphoonFiST]

Jason from dizzy tuning before I got the intake I asked him if I’d need an additional tune with the install and he told me I was good to go I specified which intake I got and all maybe data log and send to him even after his first answer ?

If he says its fine by all means go forth into the wild blue yonder

 

[ConnorFist18]

I’m not an expert that’s why I’ve been emailing people, asking on forums, I’m pretty sure it’s the intake adapter. On the 2j website it shows needed for a 2016+ and I missed the fine little print. After watching and install video I noticed the dude did what I did but mentioned he needed to get the adapter that can be my only solution because the only thing I removed is a an intake you know there isn’t much to that so anything helps thanks