Purge valve / tube PN for 2019?

[Chaski]

Purge valve on my 2019 is toast.

D2BZ-9C047-E seems to be the part number for the earlier FiSTs. Looks similar but has an extra hose. I can’t find a reliable part self lookup tool online, and have already bought the wrong part once.

Before I go to the parts counter at the dealership does anyone have the right part number for the purge valve with hoses?

Thanks,
Peter

 

[D1JL]

Why not use TascaParts.com and use your VIN to insure you get the correct part.
If that still does not work, call them.

 

[Chaski]

Why not use TascaParts.com and use your VIN to insure you get the correct part.
If that still does not work, call them.

That is exactly what I did and got the wrong part. With my vin Tasca listed a D2BZ-9C047-F. I bought it from Tasca and have had it sitting in the garage. Tried to install it today - no dice.

Purge valves seem like a consumable item on a FiST, hell- maybe I’ll get two once I get the right part.

 

[D1JL]

Obviously return the wrong part.
I suggest you call Tasca again and ask for Steve Powel, he is more diligent.

 

[Chaski]

No phone support from Tasca this week- they are short on employees and are not taking phone calls.

Anyone have a good experience with a different online Ford parts dealer?

 

[Chaski]

Tasca got back to me via email.

Now trying a F2BZ9C047CF2BZ9C047

We shall see!

 

[Chaski]

Update...
I do not have a F2BZ9C047C to try yet. I got the part number via email from Matt at Tasca A few weeks ago. Placed the order online and put in my Vin number. Several days later I get an email from Amy at Tasca informing me that the part is not correct for my car (according to the vin). I email back with no reply. I then get a “second notice” email back from Amy asking me again if I want to proceed or cancel- I reply again...

To finish it off I get an email that my order is canceled. It seems impossible to communicate with Tasca via email or phone. They still have their phone lines closed due to COVID.

So I am in the same place I was. Car randomly idles funny. Maybe one of these days I’ll get a new purge valve...

 

[Chaski]

I have installed a new purge valve in the car. Local dealership sold me the bare valve. C1BZ-9C915-A They couldn’t come up wit the entire assembly with tubes.

I cut the old one out, pressed some deburred 3/4” long sections of 5/16 steel fuel line in the plastic tube (to keep it from crushing when I slid a hose over it and clamped it.

Took a little time, a scrap of 3/8” fuel hose, scrap of 5/16” steel hardline and some clamps. So far so good!