Ram air intake!... kind of #HellKitten

[Phoenix104]

So I was busy mocking up a skid plate for my FiST and I wanted to test out another theory of mine. I previously purchased some vent tubing to fab up some brake coolers and wanted to test fit them and get a general idea of how it would work. I removed the driver fog light and ran the ducting.

While I was messing about, I saw my Mountune air hose just chilling out, so I thought "Why not shove that through the Fog light! Ram air intake bro!"

After some adjustments and tape, I routed the ducting to Mountune system. So now I got all that ricer street cred! #HellKitten


You can hear the intake a little better... not much and I didn't really notice any type of 'power gain' per say. I don't have a way to see if it had any effect on temps and such, but there was a good amount of suction.

I don't plan to keep it like that, but I thought it was a fun / unique experiment.

 

[Crooked Letta]

Now, cut those fender liners, do the same on both sides and they would go well with the Boomba air duct guides. Brake cooling ducts, done