Soooooooo, a few weeks ago I noticed my RF and LR brakes dragging a bit. So I checked the guide pins and they moved freely. Then I replaced the hoses and no change. They slowly got worse and someone mentioned the 2 switches on the pedal, so I replaced both of them. Still no luck, so I figured bad calipers. I though it was weird that they both went out at the same time, but this car has done me dirty in the past. So I said why not get a big brake kit and some brand new rear calipers for the rear…. And guess what… still frozen. So I checked the master cylinder, when I released the line the brakes seemed to free up. So, after asking a mechanic, I replaced the master cylinder…. Notice a pattern…. And holy crap, still not working. So I’m at a loss. I’ll recap…. New master cylinder, new switches on brake pedal, new calipers in the rear, Wilwood kit in the front, all new stainless hoses and my RF and LR brakes are frozen. They slowly begin to work when they have been sitting for a while. Does anyone else have any ideas?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk