Shift Light tap

[D1JL]

Locate connector C133



Here is the connector view



Locate pin #5 on the chassis side of the connector.
The wire color is Green with Orange stripe.

Here is the wiring diagram view



You will cut the Green with Orange stripe wire (Pin #5) on the chassis side of the connector.
Make sure you are far enough away from the connector and have enough wire to work with.
Use heat shrink tubing for insolation, connect as per the AutoMeter diagram provided.
You MUST solder these connections.

 

[Woods247]

Thanks a million man!! This is extremely helpful.

 

[Sam4]

Wait! We have a shift light. It's very useful - it tells me to shift often. Maybe 3 shifts by the time I hit 25mph. Why tamper with perfection?

 

[Woods247]

Wait! We have a shift light. It's very useful - it tells me to shift often. Maybe 3 shifts by the time I hit 25mph. Why tamper with perfection?

I bet I’d get better mpg than anyone on the racetrack. Winner.

 

[Woods247]

Thanks for the help @D1JL

Of course this piece of shit from eBay has LEDs that don’t light up. He’s refunding me or sending another.. Nothing like wasting my time but at least the “hard” part is done. I can hookup any functional light to the adapter and it’ll be good to go.

 

[jeffreylyon]

Please keep us posted - I'd love a sequential light for track days.