Transmission Mount Bolt Specs?

[firestang70]

Hey all I have been searching and can only find info on the passenger side. Been working 7 days a week 12 hours so would like to have everything ready and completed in a timely manner. The transmission mount bolt (the large center one) what is the pitch and thread on this? The female threads are not clean 3/4 of the way down and I need to get a tap and die set to clean up the threads. Want to make sure I have the right size before I start and order the right set. TIA

 

[TyphoonFiST]

Search much?

https://www.fiestastforum.com/threa...rans-mount-rmm-diy-install.22910/#post-419533

 

[firestang70]

Search much?

https://www.fiestastforum.com/threa...rans-mount-rmm-diy-install.22910/#post-419533

Read much? I don't see any specs on pitch and thread of the bolt I asked about? Thanks for all of the help.

 

[D1JL]

Hey all I have been searching and can only find info on the passenger side.

I am not sure what bolt you are speaking of.
Assuming you have a USDM car.
On the passenger side is the ENGINE mount.
On the Driver side is the TRANS mount.
And on the bottom is the ROLL Restrictor/RMM.

 

[TyphoonFiST]

I am not sure what bolt you are speaking of.
Assuming you have a USDM car.
On the passenger side is the ENGINE mount.
On the Driver side is the TRANS mount.
And on the bottom is the ROLL Restrictor/RMM.

He is looking for The Trans. Mount Bolt sizes Dave. NOT torque specs. I'll bet they are M10×1.5.

Sent from my SM-N975U1 using Tapatalk

 

[D1JL]

He is looking for The Trans. Mount Bolt sizes Dave. NOT torque specs. I'll bet they are M10×1.5.

I wasn't offering the torque specks.
However, I believe he is describing the engine mount on the passenger side. as there is no large bolt in the center of the trans mount.
Just trying to be sure.
One would think that if he has the bolt out, he could go to a hardware store and match the size and thread pitch.

 

[TyphoonFiST]

I wasn't offering the torque specks.
However, I believe he is describing the engine mount on the passenger side. as there is no large bolt in the center of the trans mount.
Just trying to be sure.
One would think that if he has the bolt out, he could go to a hardware store and match the size and thread pitch.

Now that I looked at my Bolt selection @ work...I think its most likely a m12x1.50. Pics would help or a diagram showing what he wants* Thought he wanted Bolt torque specs also. My bad...I am really bad and horrible person. I cant take it anymore Dave.....please Come take all my Toys away from me so I can go live in the woods and become a mountain man!

 

[D1JL]

please Come take all my Toys away

I have too much of my own and my wife wants me to sell everything.
She says, I can't mod cars any more.
So, I am moding my computer.
I'll fix her, soon I may just leave all of it to her. LOL