Video on How I maintain my Fiesta Track wheels

Member ID
#9632
Messages
164
Likes
211
#1
View: https://youtu.be/N_jC_-SRwO0


Hey guys,
This video is FiST related but more importantly I talk about why I flip my tires on my Track wheels. Mainly I flip my tires on the wheels because I run stock camber still on my ST, and I get outside tire wear but tire flipping helps me distribute the wear a little more evenly. I also share a couple of tips that help when going to get your wheels and tires mounted and balanced. Watch the video to find out more, Hope you enjoy!
 


SteveS

1000 Post Club
Member ID
#12296
Messages
1,549
Likes
1,862
#2
Hmmm. Maybe I need to have them do this on my F150. Last time I had the dealer change the oil I asked if they'd check the alignment because I was getting outside wear. They said alignment was fine but I was cornering too hard...:whistle::whistle:
 


OP
benvid
Member ID
#9632
Messages
164
Likes
211
Thread Starter #3
Sounds about right, also check tire pressures but sounds like if you want to make your current tires last longer, flipping them would help as long as they aren’t directional


Sent from my iPhone using Tapatalk
 


SteveS

1000 Post Club
Member ID
#12296
Messages
1,549
Likes
1,862
#4
I have a cloverleaf exit to go to work and to go home and I do it twice a day since I go home for lunch. Practicing a racing line on the cloverleaf wears out the edge of the LF....
 


OP
benvid
Member ID
#9632
Messages
164
Likes
211
Thread Starter #5
I have a cloverleaf exit to go to work and to go home and I do it twice a day since I go home for lunch. Practicing a racing line on the cloverleaf wears out the edge of the LF....
Nice! Gotta rotate those tires!


Sent from my iPhone using Tapatalk
 




Top