whoosh V3 intercooler Flash SALE $50 off now through 5/10/2022 @ midnight

Trader history for ron@whoosh (1)

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
#1
24 hour FLASH SALE on whoosh V3 Fiesta ST intercoolers in Black, Bright Silver, and Raw finishes
$50 off plus FREE SHIPING in the continental USA
use discount code 50offV3
price valid until midnight 5/10/2022 / new orders ONLY
link to product : https://whooshmotorsports.com/colle...ta-st-v2-whoosh-brand-front-mount-intercooler

whoosh V3 installed 1.jpg whoosh V3 installed BRIGHT SILVER.jpg
https://whooshmotorsports.com/collections/ford-fiesta-st-turbo/products/2014-fiesta-st-v2-whoosh-brand-front-mount-intercooler?fbclid=IwAR37ymVXUvMFO4XRV-VmBn1eRwSYIS6GBtCouHHrQOyyhiq9Q9bpRVwZQZQ
 


Attachments

Member ID
#22202
Messages
292
Likes
394
#2
wow, I was literally gonna order one this weekend, guess I'll just do it now. In for one! Thanks Ron!
 


gtx3076

1000 Post Club
Member ID
#11673
Messages
1,215
Likes
1,400
#3
Goddamn you Ron. I've had that intercooler and other shit sitting in my cart for the past week rationalizing all the reasons why I don't need to mod this car past my E30 tune.
 


Member ID
#21555
Messages
325
Likes
505
#4
Yeah my wallet's been getting pretty light recently... :ROFLMAO: Had to jump on this as well. Thanks Ron!
 


gtx3076

1000 Post Club
Member ID
#11673
Messages
1,215
Likes
1,400
#5
Bought your stupid intercooler and your stupid crossover pipe, and a dumb RMM.
 


OP
ron@whoosh

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
Thread Starter #6
Bought your stupid intercooler and your stupid crossover pipe, and a dumb RMM.
dude what the heck lol
:ROFLMAO:
 


OP
ron@whoosh

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
Thread Starter #8
Not that I want to buy any more shit from you, but if I did, would you recommend the turbosmarte wastegate actuator for the stock turbo, and if so, which pre-load?
7psi is all I would use on the stock turbo
Jason@Dizzy tested it and has had good results
 


gtx3076

1000 Post Club
Member ID
#11673
Messages
1,215
Likes
1,400
#9
7psi is all I would use on the stock turbo
Jason@Dizzy tested it and has had good results
Not that I want to buy anything else. But is upgrading the stock BPV necessary? I don't need or want additional sound if it doesn't come with a noticeable improvement in performance.
 


OP
ron@whoosh

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
Thread Starter #10
Not that I want to buy anything else. But is upgrading the stock BPV necessary? I don't need or want additional sound if it doesn't come with a noticeable improvement in performance.
the GFB DV+ is a great upgrade for boost levels above stock, regardless of turbo size (stock / hybrid / S280 etc)
 


Member ID
#4395
Messages
137
Likes
46
#12
I wasn't planning to buy one but I had to make a order because my coolant tank is leaking so why not put this add on!
 


Member ID
#4395
Messages
137
Likes
46
#14
And thank you, I saw the rotors are on their way so looks like I have a project for this weekend.
 


OP
ron@whoosh

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
Thread Starter #15
so we sold way more of these than I really wanted to LOL
thanks all for the orders and continued support !!
 


Member ID
#4395
Messages
137
Likes
46
#16
Got mine in today, going to try to get it on this weekend along with the trans oil change and the brake rotors. Already got that coolant tank on, nice to have no leaks.
 


gtx3076

1000 Post Club
Member ID
#11673
Messages
1,215
Likes
1,400
#18
The fitment is tight as hell. I was a little worried because I heard some folks couldn’t get the air dam back on, but I got everything back where it needed to go. There is the SLIGHTEST gap between the bumper trim and side panels.

I had to prop the intercooler on the shipping box with a another cardboard shim while I worked everything into place. Without doing that when I got one peg in its rubber grommet, the other would pop out.

I greased the intercooler inlets with a bit of silicone and worked them on as far as possible, and loosened up the clamps further up so they could flex and twist to avoid a collapsed bend. I probably reworked the piping 3-4 times over to help snug the intercooler as close to the car as possible.

Looks good.
 


Member ID
#4395
Messages
137
Likes
46
#19
Yeah it is pretty tight. I found two pieces of broken plastic in there, no clue what they broke off of as I couldn't find anything that matches them.
 


Business6

Senior Member
Member ID
#7262
Messages
899
Likes
881
#20
Yeah it is pretty tight. I found two pieces of broken plastic in there, no clue what they broke off of as I couldn't find anything that matches them.
Center bumper support tabs is the likely candidate
 




Top