SLD Free things: Continental DWS 06 Tires, OEM Door Stickers
- Thread starter swirlmarks
- Start date
Thread Starter
#27
And the wheels are sold. Sorry @LaserWhisperer
^^ I feel that! On Saturday my wife pointed out that I had a bent wheel so I did what any of us would do, turn to forum classifieds and saw this (and kinda local for pickup for me) ...having no experience with going with different size wheels, I started some research. And alas after some hmming and hawwing I refresh and saw the dreaded sold post. Congrats tho.
if you don't mind helping a wheel dummy out tho with some questions i have.
I had thought maybe doing the lockouts to stay at 17s, but they are 17x8 which has me wondering about rubbing
so, I'm back to the deckagrams (which are way nicer imo) @16"
#1 were you on stock suspension and did you have any rubbing issues or bottoming out
#2 do the wheels come with hub centric spacers or do you have to purchase separately
#3 did you need a certain lug nut
I scoured the 78-page thread on wheels but so many conflicting answers so i thought to just ask someone (you) directly, thank you
if you don't mind helping a wheel dummy out tho with some questions i have.
I had thought maybe doing the lockouts to stay at 17s, but they are 17x8 which has me wondering about rubbing
so, I'm back to the deckagrams (which are way nicer imo) @16"
#1 were you on stock suspension and did you have any rubbing issues or bottoming out
#2 do the wheels come with hub centric spacers or do you have to purchase separately
#3 did you need a certain lug nut
I scoured the 78-page thread on wheels but so many conflicting answers so i thought to just ask someone (you) directly, thank you
Thread Starter
#30
I personally went with 16” wheels over 17” so I could run a larger sidewall tire. To answer your questions:
1) I ran these wheels on stock suspension and coilovers (lowered with about one finger gap). With stock suspension, there is no rubbing. Lowered, there was slight rubbing on the rear fender liners. This was with 205/50 continental dws 06 tires.
2) the hub centric spacers are separate, you can find some nice aluminum ones on Amazon. If I can find the link I’ll post it. Edit - should be these (73.1 to 63.4):
https://www.amazon.com/73-1mm-Circuit-Performance-Aluminum-Centric/dp/B01JN0MW1W/ref=sr_1_7?crid=5C9PEXPZUTZH&keywords=hub+rings+73.1+to+63.1&qid=1667348508&qu=eyJxc2MiOiIwLjAwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ==&sprefix=63.1+,aps,73&sr=8-7
3) you will probably need some “tuner” lug nuts that have a smaller diameter than the stock ones. I didn’t ever use the stock lugs on these wheels, so I’m not sure if they’ll fit. Something with a 60 degree conical seat and 12x1.5 thread should work. For example: https://949racing.com/product/949-racing-7075-forged-alloy-lugs-12x1-5-thread/
Edit - The stock lugs are 19mm so they may fit. The aftermarket ones that I used were 19mm. You may need a thinner wall socket though.
1) I ran these wheels on stock suspension and coilovers (lowered with about one finger gap). With stock suspension, there is no rubbing. Lowered, there was slight rubbing on the rear fender liners. This was with 205/50 continental dws 06 tires.
2) the hub centric spacers are separate, you can find some nice aluminum ones on Amazon. If I can find the link I’ll post it. Edit - should be these (73.1 to 63.4):
https://www.amazon.com/73-1mm-Circuit-Performance-Aluminum-Centric/dp/B01JN0MW1W/ref=sr_1_7?crid=5C9PEXPZUTZH&keywords=hub+rings+73.1+to+63.1&qid=1667348508&qu=eyJxc2MiOiIwLjAwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ==&sprefix=63.1+,aps,73&sr=8-7
3) you will probably need some “tuner” lug nuts that have a smaller diameter than the stock ones. I didn’t ever use the stock lugs on these wheels, so I’m not sure if they’ll fit. Something with a 60 degree conical seat and 12x1.5 thread should work. For example: https://949racing.com/product/949-racing-7075-forged-alloy-lugs-12x1-5-thread/
Edit - The stock lugs are 19mm so they may fit. The aftermarket ones that I used were 19mm. You may need a thinner wall socket though.
Last edited:
thank you for answering my questions.
i did ditch the stock lugs a few years ago after i found out how hard they were to get off (while installing my mud flaps)
I appreciate the links too, that does help
i like the idea of having a larger sidewall, especially on these terrible SC roads, roads that already proved they could bend the stock wheels
thank you again
i did ditch the stock lugs a few years ago after i found out how hard they were to get off (while installing my mud flaps)
I appreciate the links too, that does help
i like the idea of having a larger sidewall, especially on these terrible SC roads, roads that already proved they could bend the stock wheels
thank you again
- Member ID
- #24647
- Messages
- 8
- Likes
- 2
Thread Starter
#37
I don’t mind shipping internationally, but just a warning that it may be a little expensive. Not sure if it would be worth it for you as these may not fit the 3 door and are maybe $12 each (can’t remember exactly) used.
Similar threads
-
-
-
-
AccessPorts are 10% OFF though 1/31, include FREE custom tune!
- Started by Jason@dizzytuning
- Replies: 2
-
-
-
-
-
-
SLD WaveSpec Sport Line Front Rotors (PAIR) USED - 400 miles - $150 FREE Ship CONUS- Started by Fiestig
- Replies: 4
