DIY Rear Camber Plates???

Member ID
#6871
Messages
237
Likes
109
#42
Yes. I contacted DNA before I put them on. You don’t have to shave anything or mess with your wheel speed sensors. You just don’t put your dust shields back on.

With the DNA Trunk Brace and Camber Plates, the Rear is grippier than ever before.
 


Attachments

Dpro

6000 Post Club
Member ID
#7958
Messages
6,363
Likes
5,994
#43
I just ordered a set. Actually got them for $113 shipped.
 


Dpro

6000 Post Club
Member ID
#7958
Messages
6,363
Likes
5,994
#45
From where? My guy was pretty cheap, but maybe where you got them would be cheaper for the LCAs
This is actually a link for front caster bushes LCA’s are at the bottom of the page . I did a Google and this place came up. Since I had looked at the DNA plates in the past I knew this was an insane deal so I jumped. Plus they had paypal which made the ordering and money convo real quick and fast.
https://www.burtonpower.com/front-wishbone-rear-bush-set-fiesta-mk7-2008-inc-st-pff19-1502g.html
 


Last edited:

TemecFist

Active member
Member ID
#8885
Messages
777
Likes
617
#46
Yes. I contacted DNA before I put them on. You don’t have to shave anything or mess with your wheel speed sensors. You just don’t put your dust shields back on.

With the DNA Trunk Brace and Camber Plates, the Rear is grippier than ever before.
How hard is the install?
 


Member ID
#6871
Messages
237
Likes
109
#47
How hard is the install?
Jack up the rear.
Take your wheels off.
Take your brake calipers and rotors off.
Take out the 4 bolts on each side.
Whack the back of the dust shields till the hubs come off the pins.
Replace dust shield with Camber Plates.
Reassemble.
 


TemecFist

Active member
Member ID
#8885
Messages
777
Likes
617
#48
Jack up the rear.
Take your wheels off.
Take your brake calipers and rotors off.
Take out the 4 bolts on each side.
Whack the back of the dust shields till the hubs come off the pins.
Replace dust shield with Camber Plates.
Reassemble.
Awesome! Thanks alot! Did you order them straight from DNA's website?
 


Member ID
#6871
Messages
237
Likes
109
#49
Awesome! Thanks alot! Did you order them straight from DNA's website?
Nope. I found a vendor here in New Jersey. He primarily deals with DNA’s Arbath parts, but he slipped in my Fiesta parts with his other order.
 




Top