mountune cat back touches bumper

[myfiSTurface]

Any one have a Mountune cat back? I've adjusted it a few times and still cannot get it to not touch the bumper where the tips come out. I did put cobb exhaust hangers just so the exhaust didn't move a lot when I put the exhaust on. I did put the factory ones on just to see how the exhaust sat and it doesn't change how it sits. Any other ideas?

 

[CanadianGuy]

You have to adjust the welded hanger points on the actual exhaust. Do this with all the joints joints loose. Once happy tighten everything. I had a slight twist on mine that I rectified. Here are some videos explaining how.

[video=youtube;35-SSKcDanY]https://www.youtube.com/watch?v=35-SSKcDanY[/video]

[video=youtube;vbPH9QVkGRM]https://www.youtube.com/watch?v=vbPH9QVkGRM[/video]

 

[myfiSTurface]

You have to adjust the welded hanger points on the actual exhaust. Do this with all the joints joints loose. Once happy tighten everything. I had a slight twist on mine that I rectified. Here are some videos explaining how.

[video=youtube;35-SSKcDanY]https://www.youtube.com/watch?v=35-SSKcDanY[/video]

[video=youtube;vbPH9QVkGRM]https://www.youtube.com/watch?v=vbPH9QVkGRM[/video]

AWESOME THANK YOU! I was thinking that but I didn't think it would be that easy to bend I figured id have to heat up or something. Thanks again I def have to do this today its bothering me every time I walk up to the car haha.

 

[TUX15ST]

Its hitting the top or the sides?

 

[myfiSTurface]

Its hitting the top or the sides?

It would be hitting the top, both sides are fine its nice and center there.