Hey everyone. I'm selling my Sync 3 Non-Nav APIM + 6.5" screen pulled from my 2016 Fiesta ST. I upgraded to a nav unit so have no need for this.
- Model # G1BT-14G370-BM
- Sync is updated to 3.4.23188 via CyanLab's Syn3 Updater.
- CarPlay worked with a proper CarPlay compatible USB hub (I used HC3Z-19A387-F). Android Auto should work but I don't have an Android so I never tested it.
- Info for APIM's AsBuilt values (2016 USDM Fiesta ST, base, ambient lighting, no navigation, no sunroof, no recaros, ST splash screen)
- The only thing included is what you see pictured (screen attached to the APIM). No other hubs, wiring, GPS, etc. are included.
Good replacement unit if yours is acting up. If you are upgrading from Sync 2, please do some additional research as I am not 100% sure what else you need to buy (brackets? USB hub? USB harness adapter? GPS connector? etc.)
With the unit off (black screen), it appears to have a few scratches if you shine a flashlight to it, but nothing deep and nothing noticeable when the unit is on. Keep in mind it's original to my 2016 ST with >80k miles so I'm not advertising it as a brand new unit.
$400 shipped to the lower 48 via USPS, tracking # and signature requested. PayPal only if not local.
I can also coordinate local pick up in Los Angeles and accept cash.
PM me to purchase. Comment below if you have any questions.
Thank you!
(Mods, I took the last 3 photos of the unit plugged in prior, so I don't have my username/date on those, but after I pulled the unit out, I took photos with my u/n & date displayed)