What Do the different stages require to run

Member ID
#11015
Messages
38
Likes
8
#1
What exactly do you need to run stage 2/3 on any tune maps? I’m currently running itg cold air, whoosh cross over pipe, and hi flow turbo inlet, MBRP cat back.
 


Last edited:
Member ID
#10744
Messages
62
Likes
39
#2
I'd say required intercooler and step colder gapped plugs. Highly recommended rmm.

Sent from my HD1905 using Tapatalk
 


Last edited:

SrsBsns

Active member
Member ID
#7714
Messages
657
Likes
695
#5
Do some searching on here and you'll find a ton of info.

For the OTS tunes, you could run them with the mods you have. Just keep an eye on your temps. I would recommend what stealthfist recommended... Upgraded intercooler and colder plugs.

And I'm surprised that it hasn't been mentioned yet, but do the rear motor mount. It makes a huge difference and is generally the first thing that should be upgraded on these cars.
 


Clint Beastwood

2000 Post Club
Member ID
#7943
Messages
2,604
Likes
2,347
#6
Do some searching on here and you'll find a ton of info.

For the OTS tunes, you could run them with the mods you have. Just keep an eye on your temps. I would recommend what stealthfist recommended... Upgraded intercooler and colder plugs.

And I'm surprised that it hasn't been mentioned yet, but do the rear motor mount. It makes a huge difference and is generally the first thing that should be upgraded on these cars.
Lol you should almost have to prove you have one before ordering any other parts lol
 




Top