• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


Anyone used the 4 point from TB Performance?

Woods247

2000 Post Club
Messages
2,662
Likes
4,860
Location
Atl
#1
I miss my Pierce 6 point a lot. I can’t run one due to aero restrictions. Currently I have the TB traction bar and cross member braces and they definitely have more flex than the Pierce 6 point. Their “torque gusset traction bar” appears as if it’ll stiffen up the flex similar to the Pierce but I figured I post and see if anyone has real-world experience with it. Link:

https://tbperformanceproducts.com/products/ford-fiesta-st2014-2019-torque-gusset-traction-bar
 


Messages
1,036
Likes
1,662
Location
San Francisco Bay Area
#3
Second the Swave. It’s a better made piece with lighter, stiffer section aluminum tubes, has a lower profile - better ground clearance by almost an inch vs the Pierce/TB, only $50 more.

I’m not a fan of most of TB’s designs with thin box tube and extra diagonals in places that are not actually useful. The only piece in my opinion they do well is the trunk brace
 


OP
Woods247

Woods247

2000 Post Club
Messages
2,662
Likes
4,860
Location
Atl
Thread Starter #4
OP
Woods247

Woods247

2000 Post Club
Messages
2,662
Likes
4,860
Location
Atl
Thread Starter #6
People seem to love the Swave. Anyone used the TB four point? $50 is lunch at Chic Fil A. I get it though. TB braces aren’t very good. I’ll pick up a Swave and swap the last Tb brace later
 


OP
Woods247
Messages
2,662
Likes
4,860
Location
Atl
Thread Starter #8
I bought the 4 point and never installed it because it felt weak. Will the pierce 4 point fit with your aero?
Nope. Unfortunately it won’t. The Swave stuff should be plenty rigid given they’re aluminum. Thanks for the reply regarding the TB brace. I’d like to support the guy but his braces have too much flex due to the materials he uses.
 


dhminer

2000 Post Club
Messages
2,554
Likes
3,005
Location
Burlington, NC, USA
#9
Nope. Unfortunately it won’t. The Swave stuff should be plenty rigid given they’re aluminum. Thanks for the reply regarding the TB brace. I’d like to support the guy but his braces have too much flex due to the materials he uses.
He sold the business so I feel less compelled to buy from them
 




Top