• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


Confirm torque settings for all 3 motor mounts?

Messages
91
Likes
18
Location
boonieville
#1
So I am planning on installing all 3 at the same time today / tomorrow.

I found the settings for all 3 here in the forums, but which settings are for which bolts / nuts are unclear for both driver / passenger sides.

So for the RMM I found:
50 ft/lbs for the large bolts on the rubber bushings
18 ft/lbs for the nuts found on the plate

Driver side:
3 nuts: 92 ft/lbs
1 bolt: 66 ft/lbs
??? pictures on the net show 3 bolt holes where it attaches to the tranny, and 2 that connect to the frame ... not so clear here either.
The picture was a after market one though, OEM might be different

Passenger side:
?? 59ft/lbs
?? 43 ft/lbs
There is the one big bolt into the connection between the 2 parts, but there are 2 bolt holes on the engine part, and 3 on the frame part ???


Could someone fill me in on which torque setting is for what on the driver / passenger sides?


I plan on putting grease on the passenger side "connector bolt" as well as on the bolts for the rubber bushing s on the RMM.
I'm also going to put loctite 451 (blue stuff) on all threads.


Thanks
 


OP
mk_not_a_robot
Messages
91
Likes
18
Location
boonieville
Thread Starter #3
Awesome, thanks dude!

I also caught this post by Koozy: Screenshot from 2019-03-09 22-23-49.png


So only a small mystery remains, for the drivers side mount where it attaches to the frame.
 


PunkST

2000 Post Club
Messages
2,239
Likes
1,413
Location
Menasha
#4
Question, do they need blue loctite? Im doing my passenger tomorrow. If so ill pick them up.
 


Messages
3
Likes
0
Location
High Point
#5
Rear:
Motor mount bolts 52 ft/lbs
Black Bracket to transmission 45 ft/lbs
Bracket to exhaust and studs on black bracket 25 ft/lbs
 


Similar threads



Top