Fiesta ST Exhaust Thread

[pelotonracer2]

Skip the intake and buy a gopro

Too late, the intake has been here for like over a week now. LOL. I have to wait until Wednesday of next week to install it though because I want to dyno each new part individually.

 

[pelotonracer2]

Here a little peak of our own exhaust system

That exhaust sounds pretty good, but a single round (especially rolled) outlet tip is not for me. I *much* prefer slanted single wall, dual 3.5" tips. They fill out the factory cut out in the valence much more appropriately. heh

 

[stinkyjoint]

by now every1 has heard my exhaust not from the cabin... and from the outside... its been proven as the best exhaust in the UK ATM.

there is 1 for sale at ?275 GBP but has slight little damage on the back box.

in USD its about $455 this is a cat back system.

but there would be import charges etc. let me no if interested.

or contact Jay@Finsport!!!!

 

[Kaneda]

Was searching ford racing for any updates regarding mountune... Found their cat-back exhaust that they don't even have a picture of yet is already on sale (at a different supplier)... Be nice if there were some details...

reg 995 - going 889...

http://www.fordracingpartsdirect.com/category_s/521.htm

 

[TheStig]

LORD that price. Better be made out of Titanium...

 

[TheStig]

May have been posted already but the FSWERKS Fiesta ST exhaust is out now. Price is good at only 550$ but its only 2.5" diameter.

Doesn't make a lot of noise either, be curious to see dyno gains.

http://www.fswerks.com/collections/ford-fiesta-st-ecoboost-16l-2014/products/fswerks-stealth-exhaust-system-ford-fiesta-st-1-6l-2014

[video=youtube;lg2vFxCIrJQ]http://www.youtube.com/watch?v=lg2vFxCIrJQ[/video]

Also worth noting the car in the video has a COBB downpipe aswell, but I cant find anywhere that COBB has even made a downpipe yet...

 

[MKVIIST]

Sounds pretty good.

 

[Colin1337]

May have been posted already but the FSWERKS Fiesta ST exhaust is out now. Price is good at only 550$ but its only 2.5" diameter.

Doesn't make a lot of noise either, be curious to see dyno gains.

http://www.fswerks.com/collections/ford-fiesta-st-ecoboost-16l-2014/products/fswerks-stealth-exhaust-system-ford-fiesta-st-1-6l-2014

[video=youtube;lg2vFxCIrJQ]http://www.youtube.com/watch?v=lg2vFxCIrJQ[/video]

Also worth noting the car in the video has a COBB downpipe aswell, but I cant find anywhere that COBB has even made a downpipe yet...

I'm sure its an R&D version of their downpipe. The only thing COBB has released is "their" filter (a green filter) and the Accessport. I'd imagine by spring we will see some more parts by them.

 

[scottiemac]

Does anybody know if any of the tuners have developed an exhaust system that features 2 tips on either side of the car? I was looking at the rear of my car the other day and thought it would be nice to see tips on both sides. I'm sure there are packaging issues and the rear diffuser would need to be trimmed on the left side, but thought it would be a good look.

 

[Harvick]

Does anybody know if any of the tuners have developed an exhaust system that features 2 tips on either side of the car? I was looking at the rear of my car the other day and thought it would be nice to see tips on both sides. I'm sure there are packaging issues and the rear diffuser would need to be trimmed on the left side, but thought it would be a good look.

Probably no tuners are going to make such a small niche system. You are better off getting an exhaust system and having a shop do some custom welding to get the dual side exits.

 

[TheStig]

Yeah if thats the way you want to go, personally i dont like it unless its true duals like on a v6 or v8. There always seems to be an exhaust difference between the two, and for some reason on a cold day when more steam is being produced by one instead of both, it erks me. Its a very small thing but im anal about it. I personally like single side exit better, like on older STI's versus the new STI's

 

[__V__]

May have been posted already but the FSWERKS Fiesta ST exhaust is out now. Price is good at only 550$ but its only 2.5" diameter.

Doesn't make a lot of noise either, be curious to see dyno gains.

http://www.fswerks.com/collections/ford-fiesta-st-ecoboost-16l-2014/products/fswerks-stealth-exhaust-system-ford-fiesta-st-1-6l-2014


Also worth noting the car in the video has a COBB downpipe aswell, but I cant find anywhere that COBB has even made a downpipe yet...

Dyno's are out http://www.fswerks.com/collections/...ealth-exhaust-system-ford-fiesta-st-1-6l-2014 looks and sounds pretty good

 

[pelotonracer2]

Does anybody know if any of the tuners have developed an exhaust system that features 2 tips on either side of the car? I was looking at the rear of my car the other day and thought it would be nice to see tips on both sides. I'm sure there are packaging issues and the rear diffuser would need to be trimmed on the left side, but thought it would be a good look.

I prefer this as well but I don't think it's going to fly with this car in it's current design.

 

[pelotonracer2]

Dyno's are out http://www.fswerks.com/collections/...ealth-exhaust-system-ford-fiesta-st-1-6l-2014 looks and sounds pretty good

I guess I shouldn't feel too bad then about my 181 hp & 228 pft on a "Dynojet" then (with 93 tune & Scorpion exhaust). When they say 91 octane, do they mean 91 octane gas was used or is that with Cobb 91 octane tune?

 

[__V__]

Pretty sure 91 octane gas, its mentioned on the 100% stock graph as well. No mention of the tune anywhere and the torque really would be higher with the tune, not so flat. Sorry about your numbers btw, I know you were hoping for better.

 

[pelotonracer2]

Pretty sure 91 octane gas, its mentioned on the 100% stock graph as well. No mention of the tune anywhere and the torque really would be higher with the tune, not so flat. Sorry about your numbers btw, I know you were hoping for better.

Oh you should see the Cobb numbers LMAO...

 

[Loder1899]

Loder1899 offers an exhaust. msg me for pricing.

http://www.loder1899.de/en/fahrzeug_3_4286.html

 

[Harvick]

Loder1899 offers an exhaust. msg me for pricing.

http://www.loder1899.de/en/fahrzeug_3_4286.html

What are the details and diameter on the system? Need sound clip too

 

[Loder1899]

Loder1899 here. We offer exhaust system, springs, rims, tires, sport cat, brakes and many other quality parts. message us if you are interested and maybe we could set up a group buy! check out the catalogue and price list form more insight. Made In Germany! Loder also owns a ford dealership so we are connected with the brand!
http://www.loder1899.de/en/fahrzeug_3_4286.html

 

[Kaneda]

I checked the website, no specific details on exhaust... diameter?