Rustoleum dipped wheels

Member ID
#2760
Messages
94
Likes
19
#1
I bought rustoleum peel coat in graphite color and also a can of duplicolor clear effex chameleon. I put 4 coats of peel coat and three coats of clear. Came out better than expected but chameleon effect doesn't really show unless up close and in direct sunlight. Give me your opinions!

 


Member ID
#2821
Messages
88
Likes
33
#2
I did the same thing last weekend!(minus the clear) The graphite isn't quite as dark as I wanted but it looks a lot better than stock.
 


Etyrnus

Active member
Member ID
#836
Messages
542
Likes
84
#3
Very nice. Reminds me of the graphite metallic wheels on the Cobalt SS/SC I had.
 


OP
C
Member ID
#2760
Messages
94
Likes
19
Thread Starter #4
I did the same thing last weekend!(minus the clear) The graphite isn't quite as dark as I wanted but it looks a lot better than stock.
I didn't want them black so this is perfect. I also wanted the metallic flake as to match the tricoat of the MO. It's honestly the perfect shade for me
 


Member ID
#2821
Messages
88
Likes
33
#6
I didn't want them black so this is perfect. I also wanted the metallic flake as to match the tricoat of the MO. It's honestly the perfect shade for me
Very true, I had some matte black vinyl on them before and the metallic graphite flake definitely compliments the flake in the TB paint on the car a lot better.
 


OP
C
Member ID
#2760
Messages
94
Likes
19
Thread Starter #7
Very true, I had some matte black vinyl on them before and the metallic graphite flake definitely compliments the flake in the TB paint on the car a lot better.
How many coats did you use?
 


Member ID
#2821
Messages
88
Likes
33
#8
How many coats did you use?
I went through 1 can and first go around then touched it up so I guess you could say 2. I probably should have done more, I already noticed a spot that scratched off on the front right wheel. Oh well now I know for next time.
 


OP
C
Member ID
#2760
Messages
94
Likes
19
Thread Starter #9
Yeah I put 4 coats on and went through roughly 2 cans. It helps peel it off if need be
 


Member ID
#2990
Messages
309
Likes
62
#10
I've been leaning towards a satin black with 2 coats of clear and paint matched wheel tape around the outer lip.
 


OP
C
Member ID
#2760
Messages
94
Likes
19
Thread Starter #11
I've been leaning towards a satin black with 2 coats of clear and paint matched wheel tape around the outer lip.
We need to meet up again so you can see it in person. Black would look good but I'm not huge on paint matched accents on wheels. I'd try to find some nice lugs and just run with that
 


Member ID
#2990
Messages
309
Likes
62
#12
We need to meet up again so you can see it in person. Black would look good but I'm not huge on paint matched accents on wheels. I'd try to find some nice lugs and just run with that
I'm always down for a meet. Karls Barkley said she's down too. There's another Pittsburgh guy lurking round here.
 


Similar threads



Top