GB Track Car Door Cards

Trader history for Jabbit (2)

Member ID
#28382
Messages
10
Likes
10
#83
All, had a little play to see if a can reduce the gaps

1) rears improved by cutting off some moulded parts and rear looks better
2) the front gaps are dictated by the motor so can not be changed

please see the attached photos
 


Attachments

Member ID
#1831
Messages
29
Likes
6
#84
These are awesome. Great job. Look to pick up a set when the time comes for the Fiesta build.

I know it’s not the right forum, but are you planning to make any for the Focus RS/ST platform as well, by any chance?
 


TyphoonFiST

9000 Post Club
Premium Account
Member ID
#3304
Messages
11,843
Likes
8,304
#85
All, had a little play to see if a can reduce the gaps

1) rears improved by cutting off some moulded parts and rear looks better
2) the front gaps are dictated by the motor so can not be changed

please see the attached photos
Instead of cutting down the door insulator, couldn't you just make the door card a little bigger......Then use a heat gun to Bend the door card to form a sordove box with the edges to eliminate the gaps and it look cleaner? Food for thought. [driving]
 


Last edited:
Member ID
#28382
Messages
10
Likes
10
#87
Instead of cutting down the door insulator, couldn't you just make the door card a little bigger......Then use a heat gun to Bend the door card to form a sordove box with the edges to eliminate the gaps and it look cleaner? Food for thought. [driving]
I will try, but concerned about repeatability of doing this, also I will look into car trims
 


Member ID
#28382
Messages
10
Likes
10
#88
Ok let me know what you think, this is the first type of trim to test, I have another one to try also
 


Attachments

Member ID
#28382
Messages
10
Likes
10
#93
I would definitely have to agree with @WannabeST on this trim. Looks way better than before in my opinion. So what’s the weight difference of these with the new trim vs stock door cards?
Thanks and if someone can measure the originals I can measure the ones I have, roughly about 1kg but I will measure them, it is mainly for getting a track car vibe from the panel and also having enough clearance for a roll cage.
 


OP
J

Jabbit

2000 Post Club
Member ID
#11420
Messages
2,244
Likes
2,904
Thread Starter #95
Quote/PM the above user. I paid for doors out of pocket and I think cards are technically ready to buy. I don't own a Fiesta ST anymore.
 


dhminer

2000 Post Club
Member ID
#12462
Messages
2,517
Likes
2,958
#96
Thanks and if someone can measure the originals I can measure the ones I have, roughly about 1kg but I will measure them, it is mainly for getting a track car vibe from the panel and also having enough clearance for a roll cage.
Hey homie how we doing?
 


Ghostly8k

New Member
Premium Account
Member ID
#34588
Messages
4
Likes
9
#97
D
Thanks and if someone can measure the originals I can measure the ones I have, roughly about 1kg but I will measure them, it is mainly for getting a track car vibe from the panel and also having enough clearance for a roll cage.
I dont mean to bump a dead thread but I have 3 full set orders that me and a few people want local. You dont have an option for the trim on your web site is this an available option still?
 




Top