What did you do to your Fiesta ST today ?

Harvick

1000 Post Club
Member ID
#339
Messages
1,144
Likes
107
Great job on cleaning the wheels. There's a thread that someone had started before that it was a good short term solution but after one or two wash it became inaffective.

Started a bit of an experiment today. Washed the wheels and applied wheel wax only on the driver side wheels. I plan to drive it a week or two, taking pictures every few days to document results. I want to see three things.
1 - How much longer do the wheels stay clean and repel brake dust with the wax?
2 - How does the wax hold up to heat/dust on front vs. rear brakes?
3 - When I can no longer stand it any more, is it any easier to clean the waxed vs. non-waxed wheels?
Went from this...
View attachment 8171

To this
View attachment 8172

And finally to this
View attachment 8174

Passenger side got a thorough cleaning but the wheels weren't removed because I wasn't going to be applying wax. I could get between the spokes and inside the rim pretty well anyways. With any luck, I'll get some good results from this. In the mean time, anyone have recommendations on good wheel wax/sealant? I just picked up some "Diamond Edge" wheel wax for this test.
 


Member ID
#3888
Messages
26
Likes
7
Definitely look forward to the results.
I'll be posting back here after a few days. We'll see if there's any noticeable difference. I'm excited to see how it turns out.

Great job on cleaning the wheels. There's a thread that someone had started before that it was a good short term solution but after one or two wash it became inaffective.
Thanks! Yeah, I imagine the wax will probably get washed off eventually. Hopefully it makes the dust less of an issue though, I love the OEM pads just not the dust they make. Maybe several coats of this stuff on the inside will keep for a while so I don't have to go through this process every few washes. We'll see how it does though!
 


Member ID
#3230
Messages
152
Likes
29
awesome experiment! I got a recommendation on here somewhere for using rain x windshield cleaner which I feel made a difference. Maybe after the wax, you could try that out?
 


Member ID
#3495
Messages
51
Likes
24
I have tried Rain-X and now trying Meguires Ultimate Detailer on my black gloss wheels. Both of these seem to make it a lot easier to wash or wipe the brake dust and road dirt off without any special wheel cleaner. I find it has to be done every week - which will be a pain come winter
 


Member ID
#2434
Messages
176
Likes
33
Drove in sleet and slush for the first time since buying the car. I can't wait for the first real snow fall to see how she does.
 


Member ID
#1177
Messages
87
Likes
31
Drove in sleet and slush for the first time since buying the car. I can't wait for the first real snow fall to see how she does.
If you've got snow tires, you're going to be obsessively looking for empty parking lots. This car rocks in the snow!
 


Member ID
#2434
Messages
176
Likes
33
If you've got snow tires, you're going to be obsessively looking for empty parking lots. This car rocks in the snow!
I went with the 15 inch steels with the general altimax arctic. The weather has been very strange for New England the past couple months. Usually it is 30s with snow by now.
 


Member ID
#1177
Messages
87
Likes
31
I went with the 15 inch steels with the general altimax arctic. The weather has been very strange for New England the past couple months. Usually it is 30s with snow by now.
I've got the same tires. They are a bit loud on dry pavement, but excellent in the snow. I plowed through a good 6 inches this morning and didn't get stuck in the slightest.
 


Member ID
#2434
Messages
176
Likes
33
I've got the same tires. They are a bit loud on dry pavement, but excellent in the snow. I plowed through a good 6 inches this morning and didn't get stuck in the slightest.
That is what I like to hear! I've been so bummed because I spent the money on them and haven't had the chance to test them out yet.
 


Member ID
#3213
Messages
389
Likes
68
Installed my Cobb AP V3 today, Stage 1 93 octane. Installed then realized I didn't have the latest maps so just did that. Car felt so much smoother on idle the torque is too much for my winters to handle lol.
 


Member ID
#3643
Messages
49
Likes
7
The other night my wife installed the Cobb Stage 1 kit on her car. Went with the 91 octane tune as 93 isn't as readily available. Unfortunately the roads aren't clean enough to truly try it out, but she says it does seem a lot peppier.
 


Member ID
#3439
Messages
135
Likes
113
Installed a Rola Roof Rack for my bike. Goes on and off pretty quick. Still rainy here, but plan on hitting a trail on Friday or Saturday

 


Member ID
#778
Messages
64
Likes
17
Installed leather shift knob cover (with black lace) from Aliexpress.

http://www.aliexpress.com/item/Genu...cover-Hand-sewing-car-styling/2045745514.html

$13.02 shipped. Search on: Genuine leather gear covers DIY Case for Ford FIESTA manual gear cover Hand sewing car styling interior decoration gear shift

20151230-2015-12-30 13.49.21.jpg 20151230-2015-12-30 13.49.33.jpg

Good quality, fits well, but I had to fold the bottom under about 3/8 inch to account for the reverse lockout ring.

Love this simple upgrade over a cold or expensive knob. Only took 20 minutes to lace up nice and tight. Laces are along the front center, out of sight and they look good.
 


LT Berzerker

Active member
Member ID
#1303
Messages
668
Likes
130
Oil change back to 5w20 (from 5w30) and new air filter (oe to motorcraft)... Huge difference in mileage... Actually pretty impressed/surprised (75 mph for about 190 miles was getting 150 per half tank) drive that for again and got 200 on half a tank... (No other changes except locking cruise in at 72, and Milwaukee 5pm traffic for the last 15 miles)

PS: had 40k on the original air filter
 




Top