What did you do to your Fiesta ST today ?

[4St4r]

New radiator, hoses, crash bar, fog lights, shaved the grill, st200 air intake for the lower hose.

not pictured Bilstein b6 struts and dampers 250lb
Spring rate from and 225lb rear ala Dialcaliper

eBay intercooler, with unbranded hot and cold side pipes too

 

[TyphoonFiST]

New radiator, hoses, crash bar, fog lights, shaved the grill, st200 air intake for the lower hose.

not pictured Bilstein b6 struts and dampers 250lb
Spring rate from and 225lb rear ala Dialcaliper

Why shave the grille? It does minimal.

 

[Ricky_Bobby_24]

Installed these new Sparco Carbon fiber pedal covers. Stock ones were getting pretty worn and it was time for a change. Only thing that sucked was it is a cramped place to work when dealing with all the tools.
overall I’m pretty satisfied and think they look great. The heal toe option is really nice with the 3D printed gas pedal spacer as well.

 

[.o/]

I like the dead pedal. Covers looks nice. How are they in terms of grip? The stock ones on mine are a little worn and can feel a little slippery at times.

 

[Capri to ST]

Those pedal covers look really nice. It does look like a difficult install. I wonder if there are any that look like that but just fit over the existing pedals without having to use tools?

 

[Stubborn Approach]

Installed 6” 6k Swift springs w/ helpers in the rear on a locals car with ST suspension. He was looking for more rear rotation and quicker response to inputs. The car was slammed so I raised it another .5-1” & set the alignment to -2.5 camber, +4 caster, 0 toe. Also installed an AWR RMM I had collecting dust on the car.

View attachment DSC00643.jpeg

 

[FknST]

Finally installed whoosh symposer delete cap at 126k. Had zero boost problems before that I was aware of but now response even seems better. Also didn’t realize the engine note was droney (stock exhaust)—no more!

 

[Dream Making]

That's promising, can you get a picture in full sunshine with brakes on?

I swear they are on

 

[Grsemky]

View attachment 70618
I swear they are on

I believe you lol, living in the desert with bright ass sun I don't think they're gonna cut it😩😩

 

[Intuit]

Back on the road last couple of days trying to burn off old fuel.

Look'n for EBC BSD280 rotors to fit the rear. (none on Amazon anymore)
I have EBC BSD1963 for the front, but haven't yet installed.

It was hit-and-run parked, couple of years ago, ironically by the driver delivering the BSD280 rotors. (never delivered the rotors)

 

[Fist2017]

Wanted to start a thread where everyone can share what they did to their Fiesta ST on a daily basis. You can share whatever information you want as long as it's relevant to the Fiesta ST.

Money shifted it 4th to third! Merging on to the highway. Thank God I don’t typically beat it, I think I hit about 4,500rpm. Just enough to get the nice burnt rubber clutch stink to fill my cabin. What a sweet aroma as you cringe and panic! 😵🔥