So to get the front bumper off you must take off 2 15mm bolts off the
windshield wiper blades, take blades off, remove upper cowl. After that, remove the 4 tq 25 bolts and the 2 trim screws from the
headlights. Then you remove lower cowl by removing 4 10mm bolts from the holes my fingers point to. 2 for each side. Make sure to disconnect the line attached to the
lower cowl. Get into the wheel well (it helps to turn your tires depending on what side your on) remove the 2 tq 25 bolts, 1 7mm bolt and trim screw from each wheel well. Time to remove the front bumper. There are 7 and 8mm bolts under the bumper. Those remove the
skid plate? Not sure what to call it. You can remove it all as one piece but I find it much easier to seperate them before reinstall. Remove the 6 8mm bolts from the fenders (3 on each side). The top 2 can be removed with a 12 in wobble extension and a standard socket. The bottom has to be removed with a
wrench. Remove the 2 8mm bolts holding up the intercooler and disconnect hoses. More will be coming soon.
Sent from my moto z4 using Tapatalk