What did you do to your Fiesta ST today ?

[Dream Making]

I personally monitor IAT, BOOST, WGDC, timing correction cyl1, AFR, and OAR...

If you're going to load a tune I highly recommend an intercooler, and the mandatory mod is definitely a RMM.

using the OBD port or with gauges?

 

[Zeille]

using the OBD port or with gauges?

Cobb accessport v3

 

[Grsemky]

using the OBD port or with gauges?

That's with an access port, i use torquepro and an OBD2 dongle to monitor much more... If you're in Europe you don't get access ports for tuning

 

[Dream Making]

That's with an access port, i use torquepro and an OBD2 dongle to monitor much more... If you're in Europe you don't get access ports for tuning

Whaaat? So for us folks in Europe we only have obd

 

[Grsemky]

Whaaat? So for us folks in Europe we only have obd

As far as I know, however with an OBD dongle and torquepro app you can monitor everything and more than what the access port is capable.. like I have one gauge that shows the heat soak from IAT at the filter to Intercooler and also tracks ambient

 

[Dream Making]

As far as I know, however with an OBD dongle and torquepro app you can monitor everything and more than what the access port is capable.. like I have one gauge that shows the heat soak from IAT at the filter to Intercooler and also tracks ambient

Yeah I do have torque pro as well but I'm not able to see the afr

 

[Grsemky]

Yeah I do have torque pro as well but I'm not able to see the afr

That's weird, I definitely have it on mine... There's a way to add/update your PIDs you might want to try that, I used this thread from a focus forum to help add a few
https://www.focusst.org/threads/pid-names-in-torque-pro.21003/

 

[TwiSTFiesta]

Waste gate duty cycle, and yeah even in a stock tune it's good to track timing as negative corrections can be a sign of engine issues...

So I’ve been monitoring ignition corrections and WGDC and have been enjoying learning more about them. Thanks for sharing. I was wondering though, at WOT, should I be getting higher than mid 60’s% WGDC? I’m stock with the COBB OTS stage 1 91, drop in filter to be installed this Monday. Higher percentage=less open more boost as opposed to lower percentage=more open less boost right?

 

[Grsemky]

So I’ve been monitoring ignition corrections and WGDC and have been enjoying learning more about them. Thanks for sharing. I was wondering though, at WOT, should I be getting higher than mid 60’s% WGDC? I’m stock with the COBB OTS stage 1 91, drop in filter to be installed this Monday. Higher percentage=less open more boost as opposed to lower percentage=more open less boost right?

Correct the higher the percentage the closer the gate is to being shut, resulting in more boost.. 60% isn't a sign of issue, our engines determine boost by the torque demand. If the engine is making sufficient power(cool air, good fuel) your boost request/WGDC will be less. What's your max boost been?