What did you do to your Fiesta ST today ?

[M-Sport fan]

Haven't done that with the car, but I put one on my motorcycle and it works great. More stopping power and more feel at the lever. Definite improvement.

Whether I stick with the factory sliding calipers, or go to a fixed caliper kit, these ARE getting done at my very near future full brake job.

 

[CanyonJim028]

Obligatory, this didn't happen today. I got my 2019 3 weeks ago. I'll my modifications over the next few days

I installed the the Ford Performance Shift Knob - I test dove a FiST that had one, and I loved it.

I also installed some vinyl wrap around the shifter's dash area. To me it looked like this area was begging to get scratched up, so I figured I would protect it while I could. Not perfect but any means, but its protected for now.

 

[XR650R]

Obligatory, this didn't happen today. I got my 2019 3 weeks ago. I'll my modifications over the next few days

I installed the the Ford Performance Shift Knob - I test dove a FiST that had one, and I loved it.

I also installed some vinyl wrap around the shifter's dash area. To me it looked like this area was begging to get scratched up, so I figured I would protect it while I could. Not perfect but any means, but its protected for now.

View attachment 39969

You might want this. I like mine: https://www.etsy.com/listing/831199...-1-5&from_market_listing_grid_organic=1&cns=1

 

[M-Sport fan]

^^I had that shift knob BEFORE I even took delivery of the car, new.

I installed it in the dealer's lot before even driving it home, and it's been on since then (11/16).

 

[Remi]

Received the Powerflex inserts for the passenger side and the transmission mount. Now I just need the time to install them.

Is this something I can get done in my driveway with basic hand tools?

 

[Sam4]

Received the Powerflex inserts for the passenger side and the transmission mount. Now I just need the time to install them.

Is this something I can get done in my driveway with basic hand tools?

Yes, although you'll need to support the engine with a jack/stands. A good time to fish that noise generator hose back to the firewall and plug it.

 

[jeff]

Drove my Fiesta yesterday...she gets out 2-3 days a week now since I have a bunch of other cars....dang what a fine car this is. 5 1/2 years later it still feels like a special machine every time I drive.

 

[CanyonJim028]

I plastidipped* and installed my Xmas present (Velossatech rear diffuser fins).

Getting them aligned and square was a bit of a challenge... but completely manageable with a little patience and masking tape.

*Only bothered because I ordered the wrong shade of grey, but now it matches the honeycomb bumper trim (despite looking darker in pics)... which I really like--so gonna consider it a happy accident!

Also tagged my new Mountune intercooler, but I'll hold off sharing until it's installed.

Those look good! How do they get installed? Any concerns with them flying off?

 

[CanyonJim028]

You might want this. I like mine: https://www.etsy.com/listing/831199...-1-5&from_market_listing_grid_organic=1&cns=1

That's nifty!

 

[FiSTY]

Those look good! How do they get installed? Any concerns with them flying off?

It's just 3M tape, but they've got a notch that hooks into the bumper and a stabilizing bracket. Read: I don't think they're going anywhere.

I'll confirm after my next automatic wash though.

 

[FiSTY]

Finally got my parts on!

See https://www.fiestastforum.com/threa...oiler-probably-not-updated.26642/#post-443065 for a listing (everything after the fins).

Pleasantly surprised to break tires in 6th omw home 😂. Absolutely love the 💨 from BOV.

I'll add some pics this weekend.

 

[LiLfieSTa]

Finally got my parts on!

See https://www.fiestastforum.com/threa...oiler-probably-not-updated.26642/#post-443065 for a listing (everything after the fins).

Pleasantly surprised to break tires in 6th omw home 😂. Absolutely love the 💨 from BOV.

I'll add some pics this weekend.

you were running OTS the whole time? you're gonna have a blast with Dizzy

 

[FiSTY]

you were running OTS the whole time? you're gonna have a blast with Dizzy

I was running bone stock until this afternoon.

Flashed the Mountune (OTS stage 2 equivalent). Figured I'll stick with it until my new plugs arrive then it's time to play with my Dizzy tune (and E30).

 

[albeeen]

Taps for Downpipe Heat Sheild

Well done, my good and faithful servant.

Mishimoto catted downpipe is up for the task!

 

[Xiocuatl]

Yes, although you'll need to support the engine with a jack/stands. A good time to fish that noise generator hose back to the firewall and plug it.

What noise generator hose?

 

[albeeen]

Taps for Downpipe Heat Sheild

Well done, my good and faithful servant.

Mishimoto catted downpipe is up for the task!

I've just stolen my own downpipe. Now for some $$$.

 

[FiSTY]

I've just stolen my own downpipe. Now for some $$$.

😂

 

[LiLfieSTa]

I was running bone stock until this afternoon.

Flashed the Mountune (OTS stage 2 equivalent). Figured I'll stick with it until my new plugs arrive then it's time to play with my Dizzy tune (and E30).

even better!

 

[SteveS]

There's someone on the forum looking for a downpipe..

 

[Remi]

Yes, although you'll need to support the engine with a jack/stands. A good time to fish that noise generator hose back to the firewall and plug it.

You're so right! That's a perfect time to remove that hose. Thanks for suggesting that.