What did you do to your Fiesta ST today ?

[JAMADOR]

I don't notice much front lift, but mine hasn't been 90+ much, and only in a straight line..

 

[M-Sport fan]

Put on a skid plate from ADF Customs.

I added the "labels."

I put it on mostly for aerodynamics- I suspect it will enhance downforce. I have 1/4" ABS sheet that I'm going to put on the remaining rough spots on the underbody.

What is the thickness (in fractions of an inch or millimeters) of that plate?

I have to fully remove the Skid Plate Guys bash guard from my car when doing oil changes when it is installed, which is just as well, since I use the longer oil filter, and would never ever be able to finagle it out using that filter hatch in the ADF plate.
(I struggle greatly with removing that filter around all of the hoses/fittings/radiator shroud flaps, etc., even with nothing at all 'extra' in the way!)

 

[STHeart]

What is the thickness (in fractions of an inch or millimeters) of that plate?

There's a link to the ADF details in my post...
https://www.adfcustoms.com/shop/fist/14skidplate

According to their website, it's type 5052 .09" Aluminum. That's 2.3 mm.

 

[STHeart]

I fabricated the left side under body aero panel today. Created a cardboard template, then cut and shaped the panel from a 3 mm 4'x8' ABS sheet. I've never worked with ABS before, so it was a bit of a learning curve. I haven't attached it yet, but that will involve rivet nuts and stand-offs as appropriate.