What did you do to your Fiesta ST today ?

[JAMADOR]

I don't notice much front lift, but mine hasn't been 90+ much, and only in a straight line..

 

[M-Sport fan]

Put on a skid plate from ADF Customs.

I added the "labels."

I put it on mostly for aerodynamics- I suspect it will enhance downforce. I have 1/4" ABS sheet that I'm going to put on the remaining rough spots on the underbody.

What is the thickness (in fractions of an inch or millimeters) of that plate?

I have to fully remove the Skid Plate Guys bash guard from my car when doing oil changes when it is installed, which is just as well, since I use the longer oil filter, and would never ever be able to finagle it out using that filter hatch in the ADF plate.
(I struggle greatly with removing that filter around all of the hoses/fittings/radiator shroud flaps, etc., even with nothing at all 'extra' in the way!)

 

[STHeart]

What is the thickness (in fractions of an inch or millimeters) of that plate?

There's a link to the ADF details in my post...
https://www.adfcustoms.com/shop/fist/14skidplate

According to their website, it's type 5052 .09" Aluminum. That's 2.3 mm.

 

[STHeart]

I fabricated the left side under body aero panel today. Created a cardboard template, then cut and shaped the panel from a 3 mm 4'x8' ABS sheet. I've never worked with ABS before, so it was a bit of a learning curve. I haven't attached it yet, but that will involve rivet nuts and stand-offs as appropriate.

FWIW high temp here in KC today was 5F. While I managed to get the workshop up to 50F with my kerosene heater, heating the ABS to bend it was still a time consuming process.

 

[Dialcaliper]

Damn that looks good. Maybe after I find where my oil seep is coming from I'll get one of these.

I put on new Brake Pads (Ford OEM) and Rotors (Powerstop Drilled and Slotted) and finally did the Shifter Base Bushings while the Fiesta is in the garage. Have the fluid and new Stainless Steel lines but will probably do those closer to a trackday (Just to have fresh fluid). And before people ask why OE Pads, if its good enough for ST Octane Academy its good for my ratty old Fiesta.

Probably doesn’t help to suggest that as soon as you put the skid plate on, it will be reallly obvious where the oil seep is coming from vs trying to look for spots on the ground 🤣

 

[our guile]

And before people ask why OE Pads, if its good enough for ST Octane Academy its good for my ratty old Fiesta.

Granted I don't track or autocross by car (yet) but I have no complaints with the OE pads and rotors. Even with the LSD and Dizzy tune they've been great for aggressive street driving.